#PSE518SA-EU
Secure Power Switch Satellite - 8-Port
Control the power of network equipment and restart crashed servers that no longer respond from a central location.
Product Features
- Eight 10A power outputs.
- Two separate 10A power inputs.
- Cascadable with Master units to control up to 136 power outlets over one serial connection.
- Environmental monitoring.
- Serial interface with ASCII protocol for the power outlets control over a KVM Switch, server, or PC.
- Special high current relay (120 A/20 ms).
- Programmable restart delays.
- Programmable power-up sequencing.
- Firmware update over the serial port.
- It occupies only 1U of rack space.
The Secure Power Switch Satellite is a power distribution and control unit that enables power management of 8 devices through an RS232 or RS485 serial connection. If more than 8 power outlets are needed, this number of controlled power outlets can be extended by cascading the units using standard RJ45 CAT5 network cables. The control of the power outlets can be performed either through a Secure Power switch Master with a built-in web server or through a ServMON environmental monitoring system. Thanks to its dual RS232 and RS485 serial interfaces, this power distribution unit can be easily controlled through most of the KVM switches, a console server, or any other equipment with an RS232 or RS485 serial interface.
On, off and Restart Functions
Each power outlet can be individually controlled through an RS232 or RS485 connection to turn ON, OFF, or restart the connected equipment. Cascadable devices The PSE518SA can be chained with standard RJ45/CAT5 network cable allowing the control of up to 136 power outlets through one serial connection.
Secure Power Switch G2 and ServMon Compatible
The secure Power Switch Satellites are intended to be used with Secure Power Switch G2 Master or ServMon XB to extend the number of controlled power outlets. These units support up to four or 16 Satellite units. Most of the KVM switches are compatible. Thanks to its dual serial interfaces and a simple command protocol, the Secure Power switch Satellite is the ideal solution to control power outlets through a KVM switch, a console server, or a PC.
Two Separate 10A Power Inputs
They allow the creation of two separate power supply circuits to control servers with redundant power supplies and provide a total power-delivering capability of 4600 VA.
Programmable Power-Up Sequencing
This prevents tripping of the building's main circuit-breaker at start-up or after a power failure. It also allows it to define the start-up order of the connected units (from 1 to 3600 s).
Firmware Update Over the Serial Port
The firmware of this product is updateable over the RS232 serial port. Configuration backup All the configuration data are stored in non-volatile memory.
Configuration and Control Over an Easy-to-Use Interface
The switch can be easily configured and controlled through an RS232 or RS485 Terminal connection using ASCII IEC 320 C13 /EU (Schuko/Europe) commands.
All configuration settings are saved in a non-volatile memory The ASCII commands enable following functions:
- Control of each power outlet
- Read out the status of each power outlet
- Set the power-up delay of each power outlet
- Read out the power-up delay of each power outlet
- Set the restart delay of each power outlet
- Read out the restart delay of each power outlet
- Set the power-up default status
- Read out the power-up the default status
- Read out the switching counters of each power outlet
- Reset the switching counters of all power outlets Restore the factory settings
- 1 Interruptor de alimentación segura por satélite
- 2 Cables de alimentación, cable de enlace RJ45 de 1,80 m (Cable de red RJ45 para conexión xBus), 0,5 m
- 1 DB-9 M/F, 1,80 m
- 1 Guía de inicio rápido
- CD-ROM con Guía del usuario
* La especificación técnica del peso es el peso de la unidad. No es el peso de envío embalado. Para conocer el peso del envío, por favor póngase en contacto con el servicio de atención al cliente de Black Box en el +34.91.659.07.32.
Garantía Double Diamond™ (estándar)
Elimine el riesgo en las compras de los equipos con la garantía Double Diamond™ de Black Box Network Services.
La garantía Double Diamond es nuestra garantía que protege sus productos de marca Black Box® * de daños accidentales, entre ellos, caídas, agua y sobretensiones.
¡Durante el período de garantía, Black Box Network Services reparará o sustituirá sus equipos averiados en un plazo de una semana desde la recepción, SIN CARGO!*
Además, obtenga una Garantía Extendida Double Diamond.
Puede también extender su garantía o proteger un producto de marca Black Box® comprado previamente** durante un período adicional de un año— ¡por solo un 10% del precio de compra! O extender su cobertura durante tres años completos ¡por solo el 20% del precio de compra!
Solicitar una extensión de garantía es sencillo: Cuando vea un producto en su cesta de compra, simplemente seleccione el período adicional de un año o tres años de cobertura en el menú desplegable bajo “Warranty Options.” Para obtener más detalles, llame al Servicio de Atención al Cliente: +34 91 659 01 91.
** Ciertos productos no admiten extensión de garantía
Además, disponemos de una política de devolución de 45 días. Simplemente llame al Servicio de Atención al Cliente para solicitar un número de RA (autorización de devolución), devuelva su producto en perfectas condiciones y en el embalaje original para recibir un reembolso completo.
