InvisaPC™ - KVM-over-IP Switching & Extension
InvisaPC makes way for Emerald SE
Effective January 31st, 2019, all components of our InvisaPC KVM product family will reach end-of-sales status. Effective March 31st, 2019, all InvisaPC products will reach end-of-life status.
InvisaPC warranties are not affected by this notification, and InvisaPC units will be replaced in the event of a failure during warranty periods.
The table below shows affected part numbers and corresponding replacement products (Emerald® SE KVM extenders). InvisaPC and Emerald SE transmitters and receivers are 100 percent compatible and fully interchangeable to support existing installations
and scaling KVM networks for future requirements.
The InvisaPC manager (DTX1032-R) will be replaced by the Boxilla® KVM/IT system manager, providing a more extensive set of features at full compatibility with both existing InvisaPC installations and Emerald devices.
InvisaPC rackmount kits (DTX1000-RMK1/DTX1000-RMK2) will also be compatible with Emerald devices.
InvisaPC Guides & Replacements
|Transmitter||InvisaPC KVM-over-IP Extender Transmitter - Single-Head||DTX1000-T|
|InvisaPC KVM-over-IP Transmitter - Dual Head||DTX1002-T||EMD2002SE-T|
|Receiver||InvisaPC KVM-over-IP Extender Receiver - Single-Head||DTX1000-R|
|InvisaPC KVM-over-IP Receiver - Dual Head||DTX1002-R||EMD2002SE-R|
|Kit||InvisaPC KVM-over-IP Extender Kit - Single-Head||N/A||DTX1000|
|InvisaPC KVM-over-IP Kit - Dual Head||N/A||DTX1002||N/A|
|Manager||InvisaPC KVM-over-IP Manager||N/A||DTX1003||BXAMGR|
|InvisaPC KVM-over-IP Manager - 32 Endpoints||DTX1032-R|