#MT14230A-SM-SC
4-Port T1E1, 1-Port 10/100 Ethernet Multiplexor with Fiber Extension - Single-Mode, 30-km, Dual SC
Multiplex four copper T1 or E1 channels and one 10/100 Ethernet onto one single-mode fiber link.
Product Features
- Aggregates four independent T1/E1 channels onto a fiber optic segment for distance
- Order a second unit for the remote conversion back to T1/E1 lines.
- Duplex single-mode fiber port supports leased line extensions up to 30 kilometers (18.6 mi.).
- It also has an integrated 10BASE-T/100BASE-TX copper LAN port for Ethernet connections.
- Ideal for extending T1 and Ethernet communications over fiber to a remote PBX and other equipment.
- Local loopback on both the copper and fiber ports.
- It also offers remote fiber loopback and circuit test modes.
- Configurable alarm relay contacts enable you to set up audio/visual fault notification.
Get extra distance for your T1/E1 and 10-/100-Mbps Ethernet communications with a pair of T1/E1 to Fiber Muxes. Unlike ordinary fiber-based T1 extenders, the four-port muxes eliminate the requirement that each channel have its own fiber link.
In a typical enterprise application, these unmanaged muxes use optical media to aggregate and extend four T1 or E1 channels from a local PBX to four T1/E1 connections at a remote PBX.
Use them also for mobile backhaul applications where you want a cost-effective, multiservice platform that's capable of delivering Ethernet and TDM services over a fiber link. Extend four T1 lines from your TDM network and an Ethernet connection from the IP network to a cell site, for instance.
With fiber optics, your T1/E1 and Ethernet communications also receive the benefits of security, immunity against EMI and RFI, and protection against the harmful effects of ground loops.
The T1/E1 to Fiber Muxes offer simple installation and use. DIP switches are used to configure the units for T1/E1 line operation and enabling port alarm relays. For troubleshooting, the T1/E1 to Fiber Mux offers local loopback on both the copper and fiber ports, as well as remote fiber loopback and circuit test pattern modes - minimizing the need for testing functions at both ends of the link.
Must be used in pairs.
When configuring the mux for E1 coax operation, you'll need G.703 75–120 Adapters (MT256A-F) to convert the RJ-48 ports to dual BNC.
This product works with:
* Technical specification weight is the unit weight. It is not the packaged shipping weight. For shipping weight, please contact Black Box customer service at 1300 73 55 66.
Double Diamond™ Warranty (Standard)
Take the risk out of equipment purchases with the Double Diamond™ Warranty from Black Box Network Services.
The Double Diamond Warranty is our no-questions-asked warranty that protects your Black Box® brand products* from faulty workmanship and defects.
During the warranty period, Black Box Network Services will repair or replace your faulty equipment at NO CHARGE!
Plus, get an Extended Double Diamond Warranty.
You can also extend your warranty or protect a previously purchased Black Box® brand product* for an additional year—for only 10% of the purchase price! Or, extend your coverage for a full three years for only 20% of the purchase price!
Ordering an extended warranty is easy: When viewing a product in your shopping cart, just select the one or three years of additional coverage in the dropdown menu under “Warranty Options.” For details, contact Customer Service at 1300-734-455.
** Certain products may not be eligible.
