Black Box 1300 73 55 66 

1300 73 55 66

#LIE1082A

Industrial Gigabit Ethernet Managed L2+ Switch - PoE+, Extreme Temperature, (6) RJ45, (2) SFP

Compact PoE switch with fiber uplinks designed for harsh environments and mission-critical applications.


Call for Pricing


Call 1300 734 455 to place order
None


Product Features

  • Provides four 10/100/1000-Mbps RJ-45 Power over Ethernet ports, two 10/100/1000-Mbps copper ports and two multispeed SFP slots.
  • PoE 802.3af and PoE+ 802.3at compatible. Delivers up to 30W per port. Dependent on the power supply used.
  • Use to connect and power security cameras and access points.
  • Rated for extreme temperatures of -40 to +75° C.
  • Managed switch supports LACP, Spanning Tree, and ring fail-over for redundancy and resiliency.
  • Dual DC power inputs for redundancy.
  • IP30-rated housing is also rated for shock and vibration protection.
  • Manage through a Web interface, SNMP or command-line interface (CLI).
  • DIN rail or wall mount.

Details

PoE+ for convenience.
This switch has four 10/10/1000-Mbps RJ-45 PoE/PoE+ copper ports and 2 10/100/1000-Mbps copper ports. This way you can power distant access points, security cameras, building access devices and industrial equipment in harsh environments where it's impractical to run electrical wires. The switch features full wire-speed forwarding rates, auto-negotiates for network speeds and Auto-MDI/MDI-X, eliminating the need for crossover cables.


The switch also has two 100/1000 Ethernet SFP slots for network flexibility and scalability. You can extend your network over multimode or single-0mode fiber at distances up to 80 km, depending on the SFP you choose.


Extreme applications.
Encased in an IP30-rated metal case, this switch withstands extreme temperatures from -40°C to +75°C (-40° F to +167° F). Use it for:

  • Security and surveillance, particularly to backhaul IP security camera data.
  • Military applications, especially in ships and other vehicles.
  • Factory automation for controlling machinery, PLCs, motor drives, sensors, counters, inspection cameras, and packaging equipment.
  • Oil and gas fields or remote equipment monitoring and control.
  • Building automation for controlling HVAC and lighting systems.

Maximize uptime.
Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. You'll also eliminate the need to send IT technicians on site—thus lowering costs.
The switch is fully manageable through SNMP, a Web browser, Telnet, or a console port. Control the bandwidth on each port individually and set up Quality of Service (QoS) priority queuing for critical applications.

The switch supports port-based VLAN and IEEE 802.1Q VLAN tagging, MAC-based trunking, IP-multicast IGMP snooping, rapid spanning tree for redundancy. Plus, it has 802.1x port-based authentication for security.
Advanced management features help minimize network downtime by enabling you to remotely diagnose and manage network problems. You'll also eliminate the need to send IT technicians on site—thus lowering costs.


Fast failovers.
For redundancy, the switch has two DC power inputs. If one power source fails, the switch automatically falls over to the second power source. It offers a 20 millisecond or less failover. In addition, an alarm will alert you in case of a power failure. The switch also gives you maximum network flexibility: Spanning Tree Protocol (STP/RSTP), Link Aggregation Control Protocol, and a ring protocol.


Installation options.
The switch features redundant power inputs and includes DIN-rail and panel-mount kits. The power supplies (MDR-40-12, MDR-40-24, MDR-40-48, and SDR-120-48) are sold separately and will determine the amount of watts available for PoE operation. The switch also includes a serial cable (RJ-45/DB9) for the console connection.

This product is covered by one of more of the following: United States Patent Nos. 7,457,250; 8,902,760; and/or 9,019,838.



Tech Specs

Environmental
Operating Temperature -40 to +167°F (-40 to +75° C)
Storage Temperature -40 to +185°F (-40 to +85° C)
General
Buffer Memory 512 Kbytes
Connectors (6) RJ-45, 10/100/1000-Mbps, auto-negotiation, MDI-MDI-X auto-crossover; (2) 100/1000 SFP slots; (1) RJ-45 RS-232 console port
Dimensions 6"H x 4.3"W x 2.3"D (15.4 x 10.9 x 6.0 cm)
Failover Link loss recovery < 20ms; Single and multiple rings supported
Flow Control IEEE 802.3x full-duplex, Back-pressure half-duplex
Humidity 5 to 95% non-condensing
Indicators LEDs: Power, Ethernet port link and speed
Ingress Protection IP30
Jumbo Frames 9K bytes
Link Aggregation Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
Link Layer Discovery Protocol (LLDP) IEEE 802.1ab
MAC Addresses 8K
Management CLI, WEB-based Management; SNMP v1, v2c, v3; Telnet (5 sessions); HTTPs, SSH; Radius Client for Management; TFTP/FTP for Configuration Import/Export; TFTP/FTP for Firmware Upgrade; Syslog; RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB; DHCP; NTP/SNTP
Management Security HTTPs, SSH; Radius Client for Management
MIBs RFC 1757 RMON 1,2,3,9; RFC 2674 Q-Bridge MIB; RFC-1213 MIB-II; RFC-1493 Bridge MIB; RFC 2233 IF MIB
Mounting Type DIn rail or wall mount
Multicast Protocols IGMP v1, v2 with up to 255 multicast groups; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering
Network Redundancy Fast failover protection rings: Link loss recovery <20ms; Single & Multiple rings supported; Spanning Tree Protocol: IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP; Port Trunk with LACP: Static trunk or Dynamic via LACP (Link Aggregation Control Protocol)
Operating Mode Store and forward; L2 wire-speed, non-blocking switching engine
PoE Management Scheduling; power control; PoE PD power consumption
PoE Output 30 watts power per port (dependent on power supply used)
Port Security IP and MAC-based access control; IEEE 802.1X authentication Network Access Control
Power Redundant input terminals, reverse power protection, 12 –58 VDC, 54–58 VDC for PoE+, 48–58 VDC for PoE; Maximum power: without PoE: 14 Watts, with PoE: 145 Watts
QoS 8 queues IEEE 802.1p QoS; SPQ, WRR scheduling schemes; port-based shaping 8 queues IEEE 802.1p QoS; SPQ, WRR scheduling schemes; port-based shaping traffic
Spanning Tree Protocol IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
Standards UL508/CSA C22, EN61010-1, CE, FCC Part 15, CISPR22 (EN55022) Class A, IEC60068-2-6, -27, -32 (Vibration, Shock, Free Fall), MTBF > 25years, IEC61000-4-2, -3, -4, -5, -6 (Level 3)
VLAN IEEE 802.1Q tag-based; IEEE 802.1ad Double Tagging; IGMP v1, v2; IGMP snooping and querying; Immediate leave and leave proxy; Throttling and filtering; IEEE 802.1ab Link Layer Discovery Protocol (LLDP)
Weight 2.3 lb. (1 kg)
Physical
Dimensions 6"H x 4.3"W x 2.3"D (15.4 x 10.9 x 6.0 cm)
PoE PoE, PoE+
Weight 2.3 lb. (1 kg)
Technology
Security IP and MAC-based access control; IEEE 802.1X authentication Network Access Control; Multicast/Broadcast/Flooding Storm Control
Product Includes:
  • RJ-45/DB9 serial cable


Product works with:

  • Power supplies (MDR-40-12, MDR-40-24, MDR-40-48, SDR-240-48)
  • SFPs (LFP411, LFP412, LFP413, LFP414, LFP416; LFP418; LFP420; LFP421)

This product is covered by one of more of the following: United States Patent Nos. 7,457,250; 8,902,760; and/or 9,019,838.
Questions? Contact our FREE Tech Support.



* Technical specification weight is the unit weight. It is not the packaged shipping weight. For shipping weight, please contact Black Box customer service at 877-877-2269.

Support

Warranty

Double Diamond Warranty Diamond

Double Diamond™ Warranty (Standard)

Take the risk out of equipment purchases with the Double Diamond™ Warranty from Black Box Network Services.

The Double Diamond Warranty is our no-questions-asked warranty that protects your Black Box® brand products* from faulty workmanship and defects.

During the warranty period, Black Box Network Services will repair or replace your faulty equipment at NO CHARGE!

Plus, get an Extended Double Diamond Warranty.

You can also extend your warranty or protect a previously purchased Black Box® brand product* for an additional year—for only 10% of the purchase price! Or, extend your coverage for a full three years for only 20% of the purchase price!

Ordering an extended warranty is easy: When viewing a product in your shopping cart, just select the one or three years of additional coverage in the dropdown menu under “Warranty Options.” For details, contact Customer Service at 1300-734-455.

** Certain products may not be eligible.