Display up to 4K UHD Video over IP to a virtually unlimited number of screens as far as your local network reaches with MediaCento IPX

MediaCento IPX is the perfect HDMI-over-IP distribution solution that enables you to transmit HDMI video over Ethernet to a virtually unlimited number of screens as far as your local network reaches.
Do you need to extend (unicast) audio/video from one source to a single screen or distribute (multicast) the same content to multiple screens? Do you need the ability to switch between multiple sources or create video walls?
MediaCento IPX has you covered. Add in the MediaCento Controller, and the system becomes an IP-based matrix switch and video wall processor.

Contact UsDownload Brochure

Vertical_Image_338×447

MediaCento Benefits

HDMI HD Video to 4K UHD Video over IP
HDMI HD Video to 4K UHD Video over IP

Unicast or multicast HDMI video and audio to a nearly unlimited number of screens on a network. You need just one transmitter and one receiver for each screen.

Easy Integration
Easy Integration

The transmitter(s) and receiver(s) install directly into an existing LAN infrastructure.

Plug-and-Play Setup
Plug-and-Play Setup

There's no need to configure any IP settings (although more experienced users can do that if needed).

Extends HD or 4K Digital
Extends HD or 4K Digital Video/Audio

HD or 4K model extends HDMI digital video/audio up to 100 m between transmitter and receiver (point-to-point) using CATx cable or (4K model only) up to 30 km between transmitter and receiver over single-mode fiber cable using a standard Gigabit SFP module.

icon_zero-latency
Lossless Compression and Ultra-low Latency

Delivers lossless compression and ultra-low latency no matter what the distance or the number of screens.

Extended Display Identification Data (EDID)
Extended Display Identification Data (EDID)

Extended display identification data (EDID) copy function results in an optimal PC-to-screen performance.

MediaCento Features

HDMI HD video to 4K UHD video over IP

The MediaCento IPX IP-based audio/video distribution solution uses existing standards-based Ethernet technology and TCP/IP protocols to unicast HDMI HD / 4K UHD video signals on your Gigabit Ethernet network. In a multicast configuration, one transmitter can drive multiple receivers with no extra network load.

Easy Integration

Transmitters and receivers install directly into your existing LAN infrastructure. There's no need to configure any IP settings or run expensive dedicated links from a back room. Better yet, being PoE-powered eliminates the need for external power supplies.

Plug-and-Play Setup

Use rotary switches to set the transmitter and receivers to the same multicast or unicast channel and all IP multicasting settings are automatically configured. Just connect your source, your display(s), and a network switch. It's ready to go!

Signals that Go for Kilometers

The units support IGMP and packetize signals so all your HD/UHD source content can be delivered anywhere you want over Ethernet wiring. The extender transmits video up to 100 m per link, but goes even longer when additional network switches are added to the mix. Use fiber with media converters to go several kilometers, if needed.

Optimal PC-to-Screen Performance

MediaCento IPX HD/4K features an extended display identification data (EDID) copy function, which ensures that the proper video settings are maintained, and is HDCP 2.2 compliant.

Matrix Switching and Video Wall Control

Use the standalone MediaCento IPX Controller with any network switch for full flexibility including dual network and video wall support, up to 8 x 8 (64 screens). Or, build the network with our unique LPB2900-series switches with built-in basic control functionality.

  • Power over Ethernet
  • Secure HDMI and Power Connectors
  • HDCP 2.2 Compliant
  • 4K Units Support USB, Serial, IR, and Analog Audio
  • Scalable Video
 

Use Cases

unicast-configuration---diagram

Unicast Mode

Transmit point-to-point video from one source to a single screen over an Ethernet network

mediacentoipx_multicast-configuration---diagram

Multicast Mode

Transmit HDMI video over Ethernet network from one source to multiple screens. This application can also support a video wall.

mediacentoipx_multicast-with-switching-and-control-configuration---diagram

Multicast Mode with Matrix Switching

Enterprise KVM management with enhanced authentication, access control, and accounting for secure communications; security interface dashboard provides real-time alerts and alarms if someone attempts to circumvent security profiles.

MediaCento Product Portfolio

Additional Products

Options for Low Bandwidth Requirements

VS-2101X_main_300 x 250

HDMI-over-IP H.264/H.265 Encoder/Decoder

The H.264/H.265 HDMI over IP Encoder/Decoder is an HDMI over H.264/H.265 transceiver. This means it can be used as an encoder or a decoder based on the mode selected.

View More
VS-2002-ENC_main_26612

HDMI-over-IP H.264 Encoder - 2-Port

This media encoder is a live streaming media encoder that interfaces with HDMI signals for delivering media over IP networks with two HDMI input(s) and one Ethernet output.

View More

Customer Success Stories

Related Resources

  • Dazzle and Entertain Your Customers with Audio-Video (AV) Solutions

    Download eBook

Audio Video Product Inquiry

Work quickly to identify needs and outline a plan of action. Contact a Black Box expert today.