Datacom > Modems & CSUs

• Midplane architecture—Separate front and rear cards make changing interfaces easy.
• Multiple functions—Supports line drivers, interface converters, fiber modems, CSU/DSUs, and synchronous modem eliminators.
• Hot swappable—MicroRACK Cards can be replaced without powering down, so you cut your network’s downtime.
• Two-, four-, and eight-port MicroRACKs—available for smaller or desktop installations. They’re just right for tight spaces that can’t accommodate a full-sized (16-port) rack.
• Optional dual cards—Some Mini Driver Cards have two drivers in one card. One MicroRACK chassis can hold up to 32 Mini Drivers!
• All standard connections available—DB25, RJ-11, RJ-45, fiber, V.35.
• Choose you own power supply—120–240 VAC, 12 VDC, 24 VDC, or 48 VDC.

Identity
Accurate and positive identification of network users, hosts, applications, services, and resources is a must. Kerberos, password tools, and protocols such as RADIUS and TACACS+ enable identification.

Perimeter security
This enables you to control access to network applications, data, and services so only authorized users and information can pass through the network.

Data privacy
Data privacy is the providing of confidential data on command to authorized users while protecting that information from eavesdropping or tampering. Tunneling, encryption technologies, and protocols like IPSec provide important protection when implementing Virtual Private Networks (VPNs).

Security monitoring
You also should regularly test and monitor security preparations. By being proactive, you can identify areas of weakness and make adjustments. When a real security event occurs, you’ll be ready.

Policy management
It’s likely your network will grow in size and complexity. You’ll need centralized policy-management tools that use directory services to grow with the network. These tools define, distribute, enforce, and audit the security policy through browser interfaces, plus they enhance the usability and effectiveness of your network’s security solutions.

Driving data? Better check the transmission.

Line drivers can operate in any of four transmission modes: 4-wire full-duplex, 2-wire full-duplex, 4-wire half-duplex, and 2-wire half-duplex. In fact, most models support more than one type of operation.

So how do you know which line driver to use in your application?

The deal with duplexing.
First you must decide if you need half- or full-duplex transmission. In half-duplex transmission, voice or data signals are transmitted in only one direction at a time, as in a CB radio conversation. In full-duplex operation, voice or data signals are transmitted in both directions at the same time, as in a telephone conversation.

The entire bandwidth is available for your transmission in half-duplex mode. In full-duplex mode, however, the bandwidth must be split in two because data travels in both directions simultaneously.

Two wires or not two wires? That is the question.
The second consideration you have is the type of twisted-pair cable you need to complete your data transmissions. Generally you need twisted-pair cable with either two or four wires. Often the type of cabling that’s already installed in a building dictates what kind of a line driver you use. For example, if two twisted pairs of UTP cabling are available, you can use a line driver that operates in 4-wire applications, such as the Short-Haul Modem-B Async or the Line Driver-Dual Handshake models. Otherwise, you might choose a line driver that works for 2-wire applications, such as the Short-Haul Modem-B 2W or the Async 2-Wire Short-Haul Modem.

If you have the capabilities to support both 2- and 4-wire operation in half- or full-duplex mode, we even offer line drivers that support all four types of operation.

As always, if you’re still unsure which operational mode will work for your particular applications, consult our Technical Support experts and they’ll help you make your decision.