Telco

Multimode, 50- and 62.5-micron cable.
Multimode cable has a large-diameter core and multiple pathways of light. It comes in two core sizes: 50-micron and 62.5-micron.

Multimode fiber optic cable can be used for most general data and voice fiber applications, such as bringing fiber to the desktop, adding segments to an existing network, and in smaller applications such as alarm systems. Both 50- and 62.5-micron cable feature the same cladding diameter of 125 microns, but 50-micron fiber cable features a smaller core (the light-carrying portion of the fiber).

Although both can be used in the same way, 50-micron cable is recommended for premise applications (backbone, horizontal, and intrabuilding connections) and should be considered for any new construction and installations. Both also use either LED or laser light sources. The big difference between the two is that 50-micron cable provides longer link lengths and/or higher speeds, particularly in the 850-nm wavelength.

Single-mode, 8–10-micron cable.
Single-mode cable has a small, 8–10-micron glass core and only one pathway of light. With only a single wavelength of light passing through its core, single-mode cable realigns the light toward the center of the core instead of simply bouncing it off the edge of the core as multimode does.

Single-mode cable provides 50 times more distance than multimode cable. Consequently, single-mode cable is typically used in long-haul network connections spread out over extended areas, including cable television and campus backbone applications. Telcos use it for connections between switching offices. Single-mode cable also provides higher bandwidth, so you can use a pair of single-mode fiber strands full-duplex for up to twice the throughput of multimode fiber.

Specification comparison:

50-/125-Micron Multimode Fiber

850-nm Wavelength:
Bandwidth: 500 MHz/km;
Attenuation: 3.5 dB/km;
Distance: 550 m;

1300-nm Wavelength:
Bandwidth: 500 MHz/km;
Attenuation: 1.5 dB/km;
Distance: 550 m

62.5-/125-Miron Multimode Fiber

850-nm Wavelength:
Bandwidth: 160 MHz/km;
Attenuation: 3.5 dB/km;
Distance: 220 m;

1300-nm Wavelength:
Bandwidth: 500 MHz/km;
Attenuation: 1.5 dB/km;
Distance: 500 m

8–10-Micron Single-Mode Fiber

Premise Application:
Wavelength: 1310 nm and 1550 nm;
Attenuation: 1.0 dB/km;

Outside Plant Application:
Wavelength: 1310 nm and 1550 nm;
Attenuation: 0.1 dB/km

Fiber optic cable not only gives you immunity to interference and greater signal security, but it’s also constructed to insulate the fiber’s core from the stress associated with use in harsh environments.

The core is a very delicate channel that’s used to transport data signals from an optical transmitter to an optical receiver. To help reinforce the core, absorb shock, and provide extra protection against cable bends, fiber cable contains a coating of acrylate plastic.

In an environment free from the stress of external forces such as temperature, bends, and splices, fiber optic cable can transmit light pulses with minimal attenuation. And although there will always be some attenuation from external forces and other conditions, there are two methods of cable construction to help isolate the core: loose-tube and tight-buffer construction.

In a loose-tube construction, the fiber core literally floats within a plastic gel-filled sleeve. Surrounded by this protective layer, the core is insulated from temperature extremes, as well as from damaging external forces such as cutting and crushing.

In a tight-core construction, the plastic extrusion method is used to apply a protective coating directly over the fiber coating. This helps the cable withstand even greater crushing forces. But while the tight-buffer design offers greater protection from core breakage, it’s more susceptible to stress from temperature variations. Conversely, while it’s more flexible than loose-tube cable, the tight-buffer design offers less protection from sharp bends or twists.

If you manage a heavy-traffic data network and demand high bandwidth for high speeds, you need digital super-fast T1 or E1.

Both T1 and E1 are foundations of global communications. Developed more than 35 years ago and commercially available since 1983, T1 and E1 go virtually anywhere phone lines go, but they’re much faster. T1, used primarily in the U.S., sends data up to 1.544 Mbps; E1, used primarily in Europe, supports speeds to 2.048 Mbps. No matter where you need to connect—North, South, or Central America, Europe, or the Pacific Rim—T1 and E1 can get your data there fast!

T1 and E1 are versatile, too. Drive a private, point-to-point line; provide corporate access to the Internet; enable inbound access to your Web Server—even support a voice/data/fax/video WAN that extends halfway around the world! T1 and E1 are typically used for:
• Accessing public Frame Relay networks or Public Switched Telephone Networks (PSTNs) for voice or fax.
• Merging voice and data traffic. A single T1 or E1 line can support voice and data simultaneously.
• Making super-fast LAN connections. Today’s faster Ethernet speeds require the very high throughput provided by one or more T1 or E1 lines.
• Sending bandwidth-intensive data such as CAD/CAM, MRI, CAT-scan images, and other large files.

Scaling T1
Basic T1 service supplies a bandwidth of 1.536 Mbps. However, many of today’s applications demand much more bandwidth. Or perhaps you only need a portion of the 1.536 Mbps that T1 supplies. One of T1’s best features is that it can be scaled up or down to provide just the right amount of bandwidth for any application.

A T1 channel consists of 24 64-kbps DS0 (Digital Signal [Zero]) subchannels that combine to provide 1.536 Mbps throughput. Because they enable you to combine T1 lines or to use only part of a T1, DS0s make T1 a very flexible standard.

If you don’t need 1.536 Mbps, your T1 service provider can rent you a portion of a T1 line, called Fractional T1. For instance, you can contract for half a T1 line—768 kbps—and get the use of DS0s 1–12. The service provider is then free to sell DS0s 13–24 to another customer.

If you require more than 1.536 Mbps, two or more T1 lines can be combined to provide very-high-speed throughput. The next step up from T1 is T1C; it offers two T1 lines multiplexed together for a total throughput of 3.152 on 48 DS0s. Or consider T2 and get 6.312 Mbps over 96 DS0s by multiplexing four T1 lines together to form one high-speed connection.

Moving up the scale of high-speed T1 services is T3. T3 is 28 T1 lines multiplexed together for a blazing throughput of 44.736 Mbps, consisting of 672 DS0s, each of which supports 64 kbps.

Finally there’s T4. It consists of 4032 64-kbps DS0 subchannels for a whopping 274.176 Mbps of bandwidth—that’s 168 times the size of a single T1 line!

These various levels of T1 service can by implemented simulta-neously within a large enterprise network. Of course, this has the potential to become somewhat overwhelming from a management standpoint. But as long as you keep track of DS0s, you always know exactly how much bandwidth you have at your disposal.

T1’s cousin, E1, can also have multiple lines merged to provide greater throughput.