High Density Media Converter System II Module, 10-/100-Mbps, Single-Strand, Managed, (1) 10-/100-Mbps Copper to (1) 100-Mbps Single-Strand Fiber, Single-Mode, 20 km (Order One of Each.), 1550-nm TX/1310-nm RX, SC

Versatile Layer 2 media converter modules function as both a media converter and a switch.

Save on infrastructure costs by sending and receiving on one fiber strand.

Extensive VLAN and QoS capabilities.

Feature an autonegotiating 10-/100-Mbps copper port plus a 100-Mbps fiber uplink port.

Fully manageable using any standard Web browser or via SNMP.

Use only one strand of fiber to transmit and receive.

Provide secure, transparent network connections to remote sites up to 60 kilometers (37.3 miles) away.

Use with our Multiport Managed Media Converters to provide secure “last mile” service to customer premises.

Fully SNMP manageable for easy integration into any managed network.

Support VLAN tagging and Q-in-Q extra tagging.

Autonegotiating copper ports.

Support half- and full-duplex operation.

RoHS compliant.

These High-Density Media Converter System II Modules, 100-Mbps, Single-Strand Fiber, Managed work within the BLACK BOX® High-Density Media Converter System II—an extremely versatile chassis-based managed media converter system with a wide range of chassis and module options. These managed modules include a comprehensive range of management options that enable carrier-grade delivery of transparent network services with tight security and full control of network traffic. The converters are fully SNMP manageable for integration into your managed network and offer full management features even when installed in an unmanaged chassis.

VLAN tagging and extra tagging
VLAN tagging enables you to separate each user’s traffic into a separate and secure data stream. These converters also support 802.1Q “Q-in-Q” extra tagging.

SNMP management.
Full SNMP v1 and v2 support make the High-Density Media Converter System II easy to integrate into any managed network. Built-in Web management enables you to manage the converters using any standard Web browser over an IP network—even the Internet—as a Java Web Servlet.

You can access management features through the serial port using Telnet™ or in-band through the converter’s uplink port. IGMP Multicast pruning sends multicast traffic only to ports for which it’s intended. 

QoS
These modules support 802.1p QoS with two internal priority queues and eight priority levels, enabling you to provide reliable throughput where it’s needed.

True Layer 2 switching
Because these modules are Layer 2 media converters, they’re true switches and actively store, filter, and forward Ethernet packets like any other Ethernet switch. Layer 2 media converters increase network efficiency and reduce network overhead, significantly increasing data throughput.

A wide range of features
All copper ports are autosensing for speed and duplex. Auto MDI/MDI-X means you never need to find a crossover cable because RJ-45 ports sense and adjust to wiring automatically.

On the fiber ports, LinkLoss™ and FiberAlert™ provide instant notification of fiber segment link problems. With LinkLoss, a fault on the fiber port is mirrored to the Ethernet twisted-pair port. If the fiber link is lost at the converter, the converter disables the twisted-pair Link LED so you can see at a glance that the link is down. FiberAlert minimizes the problems associated with the loss of fiber. If the strand is unavailable, the converter stops transmitting data and the link signal until a signal or link pulse is received.

These 10-/100-Mbps Copper to 100-Mbps Single-Strand Fiber modules enable you to save on infrastructure costs by sending and receiving data on a single strand of fiber.