Extreme Heavy-Duty Edge Switch, (2) SFP + (1) Copper Port, 100–240-VAC with IEC Connector

For extreme environments up to 167° F.

Features two SFP ports and one copper port to expand your network.

Tough steel case.

The RJ-45 port supports autonegotiation, so you can easily attach any 10-, 100-, or 1000-Mbps device.

The 100–240-VAC, 50–60-Hz power supply has an IEC connector, enabling you to add a country-specific power cord; other power options are available.

Supports both half- and full-duplex operation.

Two sets of LEDs enable you to see status information from the front, top, or side.

Supports VLAN tagging and spanning tree passthrough.

Includes Link-Loss-Learn (LLL) feature for fast network recovery.

Unlike the Ethernet switches in your wiring closet or computer center, the Ethernet switches at the edges of your network have to put up with the bumps and dirt that happen out in the real world. This is where the Heavy-Duty Edge Switch from Black Box comes in.

The switch featured here is Extreme. But we also offer a Hardened version of our Heavy-Duty Edge Switches.

Ideal for use in dusty or dirty environments, this Extreme Heavy-Duty Edge Switch is a tough Ethernet switch that enables you to expand your network into harsh industrial environments—even outdoors with protection from standing water or rainfall. It’s rated for a temperature range of -40 and +167° F (-40 and +75° C), and the sturdy, metal case functions as a heat sink so no internal airflow is needed for cooling. A sealed case resists contaminants such as dust, dirt, moisture, smoke, and insects.

Multiple power options.
This switch has a 100–240-VAC, 50–60-Hz power supply with an IEC connector, enabling you to add a country-specific power cord. Extreme Heavy-Duty Edge Switches are also available with an array of power options, including DC-powered units with internal screw terminals.

Run the distance!
This switch accepts two SFPs, which enable you to adapt the switch to a wide range of fiber types and wavelengths.

You can daisychain Heavy-Duty Edge Switches together indefinitely, making them ideal for applications such as traffic signals where many switches are needed over a long distance.

Easy to set up.
This Heavy-Duty Edge Switch is literally plug-and-play. The copper port is autosensing for speed and duplex, adjusting to the connected device automatically. Plus, the UTP port features Auto MDI/MDI-X, eliminating the need for crossover cables.

The switch has two full sets of LED indicators: one set on the front for viewing convenience when the switch is DIN rail or wallmounted and one set mounted in the end next to the media ports for easy viewing when units are in a rackmount tray.

The switch features nonblocking switching architecture with a 1K MAC address table. The 64K buffer memory makes it easy to interconnect 10-/100-/1000-Mbps devices.

Fast, redundant backup.
Like all Heavy-Duty Edge Switches, this switch features Link-Loss-Learn (LLL) for fast network recovery when using the switch in a redundant application. In a normal network situation where you have a primary link and a backup link, the network can take as much as a few minutes to recover after the primary link goes down. This is because, when the link breaks, the switch will use its old MAC address table to try to send data to the disabled port.

However, if a link breaks with LLL in place, the switch senses the disconnect and instantly clears its MAC address table, forcing a new address table that includes the new link.

LLL works on both fiber and copper ports, and you can enable or disable this feature as needed.

Use it nearly anywhere.
Use this Heavy-Duty Edge Switch as a standalone or wallmounted unit. You can also rackmount up to eight Heavy-Duty Edge Switches in the optional Rackmount Tray. To DIN rail mount this switch, order the optional DIN Rail Mounting Kit (DIN-RAIL MC2).

The switch has two full sets of LED indicators: one set on the front for viewing and one set mounted next to the media ports, so you get a clear view of the LEDs from any angle.

Don’t see it? Just ask.
If you can’t find the port combination, power source, or mounting option you require, contact our FREE Tech Support.