Product Data Sheets (pdf)...HDMI Matrix Switches
Black Box Explains...Types of KVM switches.
Black Box has the keyboard/video switches you need to share one CPU between several workstations or to control several CPUs from one monitor and keyboard.
If you do a lot of... more/see it nowswitching, you need premium switches—our top-of-the-line ServSwitch™ KVM switches give you the most reliable connections for the amount of KVM equipment supported. With ServSwitch KVM switches, you can manage as many CPUs as you want from just one workstation, and you can access any server in any computer room from any workstation. Eliminating needless equipment not only saves you money, it also gives you more space and less clutter. Plus, you can switch between PCs, Sun®, and Mac® CPUs. ServSwitch KVM switches can also cut your electricity and cooling costs because by sharing monitors, you use less power and generate less heat.
If your switching demands are very minor, you may not need products as advanced as ServSwitch. Black Box offers switches to fill less demanding needs. Most of these are manual switches or basic electronic switches, which don’t have the sophisticated emulation technology used by the ServSwitch.
For PCs with PS/2® keyboards, try our Keyboard/Video Switches. They send keyboard signals, so your CPUs boot up as though they each have their own keyboard.
With the RS/6000™ KVM Switch, you can run up to six RS/6000 servers from one workstation. Our Keyboard/ Video Switch for Mac enables you to control up to two Mac CPUs from one keyboard and monitor.
With BLACK BOX® KVM Switches, you can share a workstation with two or four CPUs. They’re available in IBM® PC and Sun Workstation® configurations.
You’ll also find that our long-life manual Keyboard/Video Switches are perfect for basic switching applications. collapse
Black Box Explains... Digital Visual Interface (DVI).
The Digital Visual Interface (DVI) video standard is based on transition-minimized differential signaling (TMDS). In a typical single-line digital signal, voltage is raised to a high level and decreased to... more/see it nowa low level to create transitions that convey data. To minimize the number of tran-sitions needed to transfer data, TMDS
uses a pair of signal wires. When one wire goes to a high-voltage state, the other goes to a low-voltage state. This balance increases the data-transfer rate and improves accuracy.
Although there are four types of DVI connectors, only DVI-D and DVI-I are commonly used for monitors. DVI-D is a digital-only connector. DVI-I supports both digital and analog RGB connections. collapse
2 Channel Component Video Splitter/Switch
Installation/User Guide (Apr-05)
2 x 1 HDMI Switch (with 3.5-mm Audio & Serial Control) Manual
Manual for AVSW-HDMI2X1A, AVSW-HDMI4X1A, AVSW-HDMI2X1 and AVSW-HDMI4X1 (Version 1)
DVI Matrix Switches
Installation/User Guide (May-09)
Black Box Explains... Matrix video switches.
Matrix switches enable computers to mix and match the output of multiple PCs on multiple video monitors.
For instance, if your operation has four PCs and you want to display the... more/see it nowvideo on one monitor to the other three monitors, a matrix video switch is what you need to handle the job. Use matrix switches for:
• Trade showsSet up a wall of video to wow the senses of attendees.
• Transportation schedulesProvide real-time updates of flights or deliveries on multiple screens.
• Training demonstrationsControl each screens video to focus everyones attention on whats important. collapse
DisplayPort is a digital video interface that was designed by the Video Electronics Standards Association (VESA) in 2006 and has been produced since 2008. It competes directly with HDMI®. Unlike... more/see it nowHDMI, however, DisplayPort is an open standard with no royalties.
This digital interface is used primarily between a computer and a monitor or a high-definition television and is built into many computer chipsets produced today. It’s incredibly versatile, with the capability to deliver digital video, audio, bidirectional communications, and accessory power over a single connector.
DisplayPort v1.1 supports a maximum of 10.8 Gbps over a 2-meter cable; v1.2 supports up to 21.6 Gbps. DisplayPort v1.2 also enables you to daisychain up to four monitors with only a single output cable. It also offers the future promise of DisplayPort Hubs that would operate much like a USB hub.
The standard DisplayPort connector is very compact and features latches that don’t add to the connector’s size. Unlike HDMI, a DisplayPort connector is easily lockable with a pinch-down locking hood, so it can't be easily dislodged. However, a quick squeeze of the connector releases the latch.
DisplayPort supports cable lengths of up to 15 meters with maximum resolutions at cable lengths up to 3 meters. Bidirectional signaling enables DisplayPort to both send and receive data from an attached device.
With the proper adapters, DisplayPort cable can carry DVI and HDMI signals, although this doesn’t work the other way around—DVI and HDMI cable can’t carry DisplayPort. Because DisplayPort can provide power to attached devices, DisplayPort to HDMI or DVI adapters don’t need a separate power supply.
The Mini DisplayPort (MiniDP or mDP) is a miniatured version of the DisplayPort interface. It carries both digital and analog computer video and audio signals. Apple® introduced the Mini DisplayPort connector in 2008 and it is now on all new Mac® computers. It is also being used in newer PC notebooks. This small form factor connector fully supports the VESA DisplayPort protocol. It is particularly useful on systems where space is at a premium, such as laptops, or to support multiple connectors on reduced height add-in cards.
8 x 8 HDMI Matrix Switch User Manual
User Manual for the VSW-HDMI8X8-B (Version 3)