Black Box Explains…HDMI
The High-Definition Multimedia Interface (HDMI®) is the first digital interface to combine uncompressed high-definition video, up to eight channels of uncompressed digital audio, and intelligent format and command data in... more/see it nowa single cable. It is now the de facto standard for consumer electronics and high-definition video and is gaining ground in the PC world.
HDMI supports standard, enhanced, and high-definition video. It can carry video signals at resolutions up to and beyond 1080p at 60 Hz (Full HD). The latest version eve support 4K video resolutions.
HDMI offers an easy, standardized way to set up home theaters and AV equipment over one cable. Use it to connect audio/video equipment, such as DVD players, set-top boxes, and A/V receivers with an audio and/or video equipment, such as a digital TVs, PCs, cameras, and camcorders. It also supports multiple audio formats from standard stereo to multichannel surround sound. Plus it provides two-way communications between the video source and the digital TV, enabling simple remote, point-and-click configurations.
NOTE: HDMI also supports HDCP (High-bandwidth Digital Content Protection), which prevents the copying of digital audio and video content transmitted over HDMI able. If you have a device between the source and the display that supports HDMI but not HDCP, your transmission won't work, even over an HDMI cable.
HDMI offers significant benefits over older analog A/V connections. It's backward compatible with DVI equipment, such as PCs. TVs, and other electronic devices using the DVI standard. A DVI-to-HDMI adapter can be used without a loss of video quality. Because DVI only supports video signals, no audio, the DVI device simply ignores the extra audio data.
The HDMI standard was introduced in December 2002. Since then, there have been a number of versions with increasing bandwidth and/or transmission capabilities.
With the introduction of HDMI (June 2006), more than doubled the bandwidth from 4.95 Gbps to 10.2 Gbps (340 MHz). It offers support for 16-bit color, increased refresh rates, and added support for 1440p WQXGA. It also added support for xvYCC color space and Dolby True HD and DTS-HD Master Audio standards. Plus it added features to automatically correct audio video synchronization. Finally, it added a mini connector.
HDMI 1.3a (November 2006), HDMI 1.3b (March 2007, HDMI 1.3b1 (November 2007), and 1.3c (August 2008) added termination recommendations, control commands, and other specification for testing, etc.
HDMI 1.4 (May 2009) increased the maximum resolution to 4Kx 2K (3840 x 2160 p/24/25/30 Hz). It added an HDMI Ethernet channel for a 100-Mbps connection between two HDMI devices. Other advancements include: an Audio Return Channel, stereoscopic 3D over HDMI (HDMI 1.3 devices will only support this for 1080i), an automotive connection system, and the micro HDMI connector.
HDMI 1.4a (March 2010) adds two additional 3D formats for broadcast content.
HDMI 2.0 (August 2013), which is backwards compatible with earlier versions of the HDMI specification, significantly increases bandwidth up to 18 Gbps and adds key enhancements to support market requirements for enhancing the consumer video and audio experience.
HDMI 2.0 also includes the following advanced features:
Resolutions up to 4K@50/60 (2160p), which is four times the clarity of 1080p/60 video resolution, for the ultimate video experience.
Up to 32 audio channels for a multi-dimensional immersive audio experience.
Up to 1536Hz audio sample frequency for the highest audio fidelity.
Simultaneous delivery of dual video streams to multiple users on the same screen.
Simultaneous delivery of multi-stream audio to multiple users (up to four).
Support for the wide angle theatrical 21:9 video aspect ratio.
Dynamic synchronization of video and audio streams.
CEC extensions provide more expanded command and control of consumer electronics devices through a single control point.
There are four HDMI connector types. Type A and Type B are defined in the HDMI 1.0 specification. Type C is defined in HDMI 1.3, and Type D is defined in HDMI 1.4.
Type A: 19 pins. It supports all SDTV, EDTV, and HDTV modes. It is electrically compatible with single-link DVI-D.
Type B: 29 pins. Offers double the video bandwidth of Type A. Use for very high-resolution displays such as WQUXGA. It's electronically compatible with dual-link DVI-D.
Type C Mini: 19 pins. This mini connector is intended for portable devices. It is smaller than Type A but has the same pin configuration and can be connected to Type A cable via an adapter or adapter cable.
Type D Micro: 19 pins. This also has the 19-pin configuration of Type A but is about the size of a micro-USB connector.
Recently, HDMI Licnsing, LLC announced that all able would be tested as either Standard or High-Speed cables. Referring to cables based on HDMI standard (e.g. 1.2, 1.3 etc.) is no longer allowed.
Standard HDMI cable is designed for use with digital broadcast TV, cable TV, satellites TV, Blu-ray, and upscale DVD payers to reliably transmit up to 1080i or 720p video (or the equivalent of 75 MHz or up to 2.25 Gbps).
High-Speed HDMI reliably transmits video resolutions of 1080p and beyond, including advanced display technologies such as 4K, 3D, and Deep Color. High-Speed HDMI is the recommended cable for 1080p video. It will perform at speeds of 600 MHz or up to 18 Gbps, the highest bandwidth urgently available over an HDMI cable.
Additional resources and licensing information is available at HDMI.org. collapse
Black Box Explains...4K
4K is a term to describe a maximum video resolution of 4096 x 2400 pixels. However, the most commonly used resolution is UHD (Ultra High Definition) at 3840 x 2160... more/see it nowpixels. This resolution basically allows for four full HD signals of 1920 x 1080 pixels to be displayed on a single screen. Unfortunately, the pure pixel count doesn't tell the complete the story. The following overview provides an examination of some key differences to provide users with a better understanding of potential requirements to help select suitable solutions.
Maximum resolution: 4096 x 2400, with 3840 x 2160 reflecting between 8.9 Megapixel and 9.8 Megapixel
Refresh rate: 24p/30p/60p
The DVI specification allows 1920 x 1200 pixels to be transmitted in single-link format or 2560 x 1600 (2048 x 2048) pixels in dual link. Typically, the single link is supported by 23- or 24-inch displays, commonly called Full HD panels. The dual-link resolutions require larger screen sizes of typically 27 inches (2560 x 1440), 30 inch (2560 x 1600), or square ATC displays of 2048 x 2048 pixels.
Full 4K resolutions of 3840 x 2160 or higher over DVI dual link are possible, but only at less than 30 Hz due to bandwidth limitations. The bandwidth required for professional AV and PC environments can come to 4.95 Gbps (165 Mhz) for single link or 9.9 Gbps (2x 165 Mhz) for dual-link DVI.
HDMI and DVI share the same digital video signal format, but HDMI 1.2 allows for higher pixel clock frequencies, resulting in higher bandwidth or resolutions and deeper color.
The specifications vary based on the different HDMI versions. Up to HDMI 1.2 the specs more or less reflect those of DVI video. HDMI 1.3 and 1.4 exceed the dual-link DVI specs although it only uses a single link. HDMI 1.3/1.4 bandwidth is 10.2 Gbps (single link 140 Mhz).
Most HDMI 4K appliances and displays currently on the market are limited to 30 Hz. The recently released HDMI 2.0 standard increases bandwidth to 18 Gpbs (600 Mhz), effectively matching the bandwidth of DisplayPort for supporting 4K at up to 60 fps. The first HDMI 2.0 displays supporting this full specification are presently showing up on the market. HDMI is commonly used on almost all consumer and professional AV equipment.
DisplayPort is a slightly different, micro packet-based, video standard supporting a maximum bandwidth of approximately 17 Gbits. This currently makes it the only suitable single-connect option for full UHD (3840 x 2160) at 60 fps.
DisplayPort is mainly used on PC graphic adapter cards. Note: all current graphics cards with DisplayPort support the full DisplayPort 1.2a specification of 5.4 Gbps per lane and therefore only support 30 fps rather than 60 fps 4K resolutions.
Thunderbolt 1.0 is an Apple-only interface for multi-purpose use including video. Thunderbolt is compatible with DP 1.1 and capable of natively outputting DisplayPort signals. Thunderbolt 2.0 is needed to support 4K at 60Hz, and is compatible with DisplayPort 1.2.
Different ways of delivering 4K
Depending on the specifications of the equipment being used, a 4K signal may be delivered in the following ways:
Full spec 60 fps
Display/projector with four single-link DVI interfaces and synchronized channels. Acts like a video wall in just a single large device.
Display/projector with two dual-link DVI interfaces and synchronized channels. Acts like a video wall in just a single large device.
Display/projector with either two dula-link DVI or HDMI 1.4 inputs. The term used to describe this method is Multiple Protocol Transport (MPT).
Display with either DisplayPort, Thunderbolt, or upcoming HDMI 2.0 full spec interfaces.
4K @ 24/30 fps
Display/projector with either one dual-link DVI or HDMI 1.4 input. (MPT.)
Display with either DisplayPort, Thunderbolt or upcoming HDMI 2.0 full spec interfaces. collapse
Black Box Explains...HDBaseT
HDBaseT is a connectivity standard for distribution of uncompressed HD multimedia content. HDBaseT technology converges full HD digital video, audio, 100BaseT Ethernet, power over cable, and various control signals through... more/see it nowa single LAN cable. This is referred to as 5Play™, a feature set that sets HDBaseT technology above the current standard.
HDBaseT delivers full HD/3D and 2K/4K uncompressed video to a network of devices or to a single device (point-to-point). HDBaseT supports all key HDMI 1.4 features, including EPG, Consumer Electronic Controls (CEC), EDID, and HDCP. The unique video coding scheme ensure the highest video quality at zero latency.
As with the video, HDBaseT audio is passed through from the HDMI chipset. All standard formats are supported, including Dolby Digital, DTS, Dolby TrueHD, DTS HD-Master Audio.
HDBaseT supports 100Mb Ethernet, which enables communications between electronic devices including televisions, sound systems, computers, and more. Additionally, Ethernet support enables access to any stored multimedia content (such as video or music streaming).
HDBaseT's wide range of control options include CEC, RS-232, and infrared (IR). IP control is enabled through Ethernet channel support.
The same cable that delivers video, audio, Ethernet, and control can deliver up to 100W of DC power. This means users can place equipment where one wants to, not just those locations with an available power source.
HDBaseT sends video, audio, Ethernet, and control from the source to the display, but only transfers 100Mb of data from display to source (Ethernet and control data). The asymmetric nature of HDBaseT is based on a digital signal processing (DSP) engine and an application front end (AFE) architecture.
HDBaseT uses a proprietary version of Pulse Amplitude Modulation (PAM) technology, where digital data is represented as a coding scheme using different levels of DC voltage at high rates. This special coding provides a better transfer quality to some kinds of data without the need to "pay" the protecting overhead for the video content, which consumes most of the bandwidth. HDBaseT PAM technology enables the 5Play feature-set to be maintained over a single 330-foot (100 m) CAT cable without the electrical characteristics of the wire affecting performance.