Black Box Explains...Wireless Ethernet standards.
The precursor to 802.11b, IEEE 802.11 was introduced in 1997. It was a beginning, but 802.11 only supported speeds up to 2 Mbps. And it supported two entirely different... more/see it nowmethods of encodingFrequency Hopping Spread Spectrum (FHSS) and Direct Sequence Spread Spectrum (DSSS). This led to confusion and incompatibility between different vendors equipment.
802.11b is comfortably established as the most popular wireless standard. With the IEEE 802.11b Ethernet standard, wireless is fast, easy, and affordable. Wireless devices from all vendors work together seamlessly. 802.11b is a perfect example of a technology that has become both sophisticated and standardized enough to really make life simpler for its users.
The 802.11b extension of the original 802.11 standard boosts wireless throughput from 2 Mbps all the way up to 11 Mbps. 802.11b can transmit up to 200 feet under good conditions, although this distance may be reduced considerably by the presence of obstacles such as walls.
This standard uses DSSS. With DSSS, each bit transmitted is encoded and the encoded bits are sent in parallel across an entire range of frequencies. The code used in a transmission is known only to the sending and receiving stations. By transmitting identical signals across the entire range of frequencies, DSSS helps to reduce interference and makes it possible to recover lost data without retransmission.
The 802.11a wireless Ethernet standard is new on the scene. It uses a different band than 802.11b—the 5.8-GHz band called U-NII (Unlicensed National Information Infrastructure) in the United States. Because the U-NII band has a higher frequency and a larger bandwidth allotment than the 2.4-GHz band, the 802.11a standard achieves speeds of up to 54 Mbps. However, its more limited in range than 802.11b. It uses an orthogonal frequency-division multiplexing (OFDM) encoding scheme rather than FHSS or DSSS.
802.11g is an extension of 802.11b and operates in the same 2.4-GHz band as 802.11b. It brings data rates up to 54 Mbps using OFDM technology.
Because it's actually an extension of 802.11b, 802.11g is backward-compatible with 802.11b—an 802.11b device can interface directly with an 802.11g access point. However, because 802.11g also runs on the same three channels as 802.11b, it can crowd already busy frequencies.
Super G® is a subset of 802.11g and is a proprietary extension of the 802.11g standard that doubles throughput to 108 Mbps. Super G is not an IEEE approved standard. If you use it, you should use devices from one vendor to ensure compatibility. Super G is generally backwards compatible with 802.11g.
80211n improves upon 802.11g significantly with an increase in the data rate to 600 Mbps. Channels operate at 40 MHz doubling the channel width from 20 MHz. 802.11n operates on both the 2.4 GHz and the 5 GHz bands. 802.11n also added multiple-input multiple-output antennas (MIMO).
Multiple-Input/Multiple-Output (MIMO) is a part of the new IEEE 802.11n wireless standard. It’s a technique that uses multiple signals to increase the speed, reliability, and coverage of wireless networks. It transmits multiple datastreams simultaneously, increasing wireless capacity to up to 100 or even 250 Mbps.
This wireless transmission method takes advantage of a radio transmission characteristic called multipath, which means that radio waves bouncing off surfaces such as walls and ceilings will arrive at the antenna at fractionally different times. This characteristic has long been considered to be a nuisance that impairs wireless transmission, but MIMO technology actually exploits it to enhance wireless performance.
MIMO sends a high-speed data stream across multiple antennas by breaking it into several lower-speed streams and sending them simultaneously. Each signal travels multiple routes for redundancy.
To pick up these multipath signals, MIMO uses multiple antennas and compares signals many times a second to select the best one. A MIMO receiver makes sense of these signals by using a mathematical algorithm to reconstruct the signals. Because it has multiple signals to choose from, MIMO achieves higher speeds at greater ranges than conventional wireless hardware does. collapse
MediaCento IPX Signal Extenders Brochure
Extend HDMI video and USB over a LAN to an unlimited number of screens! (Version 3)
MediaCento IPX Controller User Manual
User Manual for the VSW-MC-CTRL (Version 1)
Product Data Sheets (pdf)...4K HDBaseT HDMI Extender
Video...AV-Over-IP Webinar from Black Box
Sending high-quality images and video over a local area network (LAN) has never been easier or more advantageous. It's cost-effective, easy to implement, flexible and scalable, and has no distance... more/see it nowlimitations. Using an IP-based video distribution platform, such as the MediaCento™ IPX, provides a whole new level of scalability compared to existing proprietary and coax systems. Any number of displays located anywhere in the building can receive video content through connection to the LAN. In addition to AV-over-IP solutions such as the MediaCento IPX, Black Box has a host of ProAV solutions, such as HDMI matrix switches, scalers, and video wall controllers collapse
MediaCento USB User Manual
User Manual for the UVX-HDMI-POE-TX and UVX-HDMI-POE-RX (Version 1)
4K HDMI IR Extender 70M User Manual
User Manual for the VX-HDMI-TP-70M (Version 1)
Black Box Explains...4K
4K is a term to describe a maximum video resolution of 4096 x 2400 pixels. However, the most commonly used resolution is UHD (Ultra High Definition) at 3840 x 2160... more/see it nowpixels. This resolution basically allows for four full HD signals of 1920 x 1080 pixels to be displayed on a single screen. Unfortunately, the pure pixel count doesn't tell the complete the story. The following overview provides an examination of some key differences to provide users with a better understanding of potential requirements to help select suitable solutions.
Maximum resolution: 4096 x 2400, with 3840 x 2160 reflecting between 8.9 Megapixel and 9.8 Megapixel
Refresh rate: 24p/30p/60p
The DVI specification allows 1920 x 1200 pixels to be transmitted in single-link format or 2560 x 1600 (2048 x 2048) pixels in dual link. Typically, the single link is supported by 23- or 24-inch displays, commonly called Full HD panels. The dual-link resolutions require larger screen sizes of typically 27 inches (2560 x 1440), 30 inch (2560 x 1600), or square ATC displays of 2048 x 2048 pixels.
Full 4K resolutions of 3840 x 2160 or higher over DVI dual link are possible, but only at less than 30 Hz due to bandwidth limitations. The bandwidth required for professional AV and PC environments can come to 4.95 Gbps (165 Mhz) for single link or 9.9 Gbps (2x 165 Mhz) for dual-link DVI.
HDMI and DVI share the same digital video signal format, but HDMI 1.2 allows for higher pixel clock frequencies, resulting in higher bandwidth or resolutions and deeper color.
The specifications vary based on the different HDMI versions. Up to HDMI 1.2 the specs more or less reflect those of DVI video. HDMI 1.3 and 1.4 exceed the dual-link DVI specs although it only uses a single link. HDMI 1.3/1.4 bandwidth is 10.2 Gbps (single link 140 Mhz).
Most HDMI 4K appliances and displays currently on the market are limited to 30 Hz. The recently released HDMI 2.0 standard increases bandwidth to 18 Gpbs (600 Mhz), effectively matching the bandwidth of DisplayPort for supporting 4K at up to 60 fps. The first HDMI 2.0 displays supporting this full specification are presently showing up on the market. HDMI is commonly used on almost all consumer and professional AV equipment.
DisplayPort is a slightly different, micro packet-based, video standard supporting a maximum bandwidth of approximately 17 Gbits. This currently makes it the only suitable single-connect option for full UHD (3840 x 2160) at 60 fps.
DisplayPort is mainly used on PC graphic adapter cards. Note: all current graphics cards with DisplayPort support the full DisplayPort 1.2a specification of 5.4 Gbps per lane and therefore only support 30 fps rather than 60 fps 4K resolutions.
Thunderbolt 1.0 is an Apple-only interface for multi-purpose use including video. Thunderbolt is compatible with DP 1.1 and capable of natively outputting DisplayPort signals. Thunderbolt 2.0 is needed to support 4K at 60Hz, and is compatible with DisplayPort 1.2.
Different ways of delivering 4K
Depending on the specifications of the equipment being used, a 4K signal may be delivered in the following ways:
Full spec 60 fps
Display/projector with four single-link DVI interfaces and synchronized channels. Acts like a video wall in just a single large device.
Display/projector with two dual-link DVI interfaces and synchronized channels. Acts like a video wall in just a single large device.
Display/projector with either two dula-link DVI or HDMI 1.4 inputs. The term used to describe this method is Multiple Protocol Transport (MPT).
Display with either DisplayPort, Thunderbolt, or upcoming HDMI 2.0 full spec interfaces.
4K @ 24/30 fps
Display/projector with either one dual-link DVI or HDMI 1.4 input. (MPT.)
Display with either DisplayPort, Thunderbolt or upcoming HDMI 2.0 full spec interfaces. collapse
Product Data Sheets (pdf)...Extended-Range HDMI and IR Extender
- Visio Stencil Drawing...