Find the right product for your application with these fast, easy online tools.
Black Box is a qualified GSA supplier and acceptsall government purchasing cards.
Meet government requirements with our extensiveline of TAA compliant products.
Save with discounts tailored for first-time buyers,vertical markets, resellers, and more.
Sign up to receive your favoriteBlack Box catalogs free.
Get fast answers from one of our Experts.
Helping you is our priority at Black Box.You can contact us by phone, fax, email, or chat with one of our Experts for immediate assistance.
An Expert will call you within30 seconds. It's live and it'sfree.
Get fast answersfrom one of ourExperts.
Helping you is our priority at BlackBox. You can contact us by phone,fax, or email with one of our Experts for immediate assistance.
We're here from8 A.M. to 7 P.M. Eastern
Local Sales Calls
1300 73 44 55
International Sales Calls
+61 3 9237 8100
(03) 9764 0673
+61 3 9764 0673
0800 653 219
0800 737 837
We’ll respond in 60 seconds or less!
Answered in 15 minutes or less!
We'll answer within 60 minutes or less!
Terminating fiber cable used to be a job for experts only. But today, prepolished connectors make it possible for anyone to terminate multimode fiber—all you need is a bit of... more/see it nowpatience and the right tools. Here’s how to terminate fiber with ST connectors:
Step 1 — Slide the connector strain-relief boot, small end first, onto the cable.
Step 2 — Using a template, mark the jacket dimensions to be stripped (40 mm and 52 mm from the end).
Step 3 — Remove the outer jacket from the cable end to the 40 mm mark. Cut the exposed Kevlar. Carefully remove the jacket to the 52-mm mark, exposing the remaining length of Kevlar.
Step 4 — Fan out the Kevlar fibers and slide the crimp ring of the connector approximately 5 mm over the fibers to hold them out of the way. Mark the fiber buffer 11 mm from the end of the cable jacket. Also, mark the buffer where it meets the jacket.
Step 5 — Bit by bit, strip off the buffering until you reach the 11-mm mark. Check the mark you made on the buffer at the jacket. If it’s moved, carefully work the buffer back into the jacket to its original position.
Step 6 — Clean the glass fiber with an alcohol wipe. Cleave the fiber to an 8-mm length.
Step 7 — Carefully insert the fiber into the connector until you feel it bottom out and a bow forms between the connector and the clamp. Cam the connector with the appropriate tool.
Step 8 — Crimp the connector.
Step 9 — Slide the crimp ring up the jacket away from the connector, releasing the Kevlar fibers. Fan the fiber so they encircle the buffer. The ends of the fibers should just touch the rear of the connector—if they’re too long, trim them now.
Step 10 — Crimp the connector again.
Step 11 — Slide the strain-relief boot over the rear of the connector. You might want to put a bead of 411 Loctite adhesive for extra strength on the rear of the boot where it meets the jacket.
Although the details may vary slightly with different connectors and termination kits, the basic termination procedure is the same. collapse
Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.
Get in touch and stay in touch with Black Box Network Services:
» Contact us
» Get Catalog
Black Box Network Services offers comprehensive communications and infrastructure solutions. Find out what we can do for you:
Find high quality products at the right price. Search and buy from our 118,000+ product catalog:
Black Box Network Services is the world's largest independent provider of communications, infrastructure, and product solutions. Learn more about us: