Product Data Sheets (pdf)...Modular Data Plug Termination Kit
Product Data Sheets (pdf)...Cross-Connect Wire Cable Prep Tool
Product Data Sheets (pdf)...PC Tool Kit
Product Data Sheets (pdf)...VoIP Tool Kit
Product Data Sheets (pdf)...LAN/WAN Tool Kit
Product Data Sheets (pdf)...Crimp Tools
Black Box Explains...Cable termination.
Product Data Sheets (pdf)...Tool Kits
Product Data Sheets (pdf)...RJ-11, RJ-45, and MMJ Crimp Tool
Product Data Sheets (pdf)...CAT5e Installation Kit
Carefully remove the jacketing from the cable and expose one inch of the insulated wire conductors. Do not remove any insulation from the conductors. When the RJ-45 connector is... more/see it nowcrimped, the contacts inside will pierce the conductor insulation.
Untwist the wires to within 1/8" of the jacket. Arrange the wires according to the cable spec (568B in this case). Flatten and align the wires. Make one straight cut across all the conductors, removing approximately 1/2" to ensure the ends are of equal length.
Slide the wires into a connector. The cable jacket should extend into the connector about 1/4" for strain relief. Orient the wires so connector Pin 1 aligns with cable Pin 1, etc. Hold the connector in front of you. With the locking tab down, Pin 1 is on the far left.
Insert the connector into a crimp tool. Make sure you’re using the proper die. Firmly squeeze the handles. They’ll lock in a ratcheting action. A final click indicates the connector is firmly latched.
Check your work using a continuity tester or cable certifier rated for the cable standard you’re installing. Your tester should be able to check for shorts, opens, or miswires.