Black Box Explains...The difference between the SurgeArrest and power strips.
It says UL® listed, so it must be okay, right? Don’t be fooled. The $5.99 surge suppressor you picked up for your home PC may be nothing more than a... more/see it nowmultiple outlet extension cord.
UL® listed means that a product has been submitted to Underwriter’s Laboratories® for safety testing in certain categories. The strip protector you just bought is probably listed in the extension cord category. It won’t stop harmful surges from destroying equipment data.
The UL® listing for surge suppressors is UL® 1449. APC® SurgeArrest® products received the best UL® 1449 rating. Some vendors rate surge protection on the basis of joule energy. But let-through should be compared.
Basically, let-through is a measure of how much of a spike or surge each protector will let though to your electronic equipment. The lower the let-through rating, the better the suppression. And the SurgeArrest is guaranteed forever—even if it takes a catastrophic hit. It may be the last surge protector you buy. collapse
Black Box Explains...Power problems.
The Threat — A sag is a decline in the voltage level. Also known as “brownouts,” sags are the most common power problem.
The Cause — Sags can be caused... more/see it nowlocally by the start-up demands of electrical devices such as motors, compressors, and elevators. Sags may also happen during periods of high electrical use, such as during a heat wave.
The Effect — Sags are often the cause of “unexplained” computer glitches such as system crashes, frozen keyboards, and data loss. Sags can also reduce the efficiency and lifespan of electrical motors.
The Threat — A blackout is a total loss of power.
The Cause — Blackouts are caused by excessive demand on the power grid, an act of nature such as lightning or an earthquake, or a human accident such as a car hitting a power pole or a backhoe digging in the wrong place.
The Effect — Of course a blackout brings everything to a complete stop. You also lose any unsaved data stored in RAM and may even lose the total contents of your hard drive.
The Threat — A spike, also called an impulse, is an instantaneous, dramatic increase in voltage.
The Cause — A spike is usually caused by a nearby lightning strike but may also occur when power is restored after a blackout.
The Effect — A spike can damage or completely destroy electrical components and also cause data loss.
The Threat — A surge is an increase in voltage lasting at least 1/120 of a second.
The Cause — When high-powered equipment such as an air conditioner is powered off, the excess voltage is dissipated though the power line causing a surge.
The Effect — Surges stress delicate electronic components causing them to wear out before their time.
The Threat — Electrical noise, more technically called electromagnetic interference (EMI) and radio frequency interference (RFI), interrupts the smooth sine wave expected from electrical power.
The Cause — Noise has many causes including nearby lightning, load switching, industrial equipment, and radio transmitters. It may be intermittent or chronic.
The Effect — Noise introduces errors into programs and data files. collapse
Product Data Sheets (pdf)...Rackmount and Cabinet Power Strips with Surge Protection
Product Data Sheets (pdf)...Standalone, Vertical, and Rackmount AC Power Outlet Strips
- Quick Start Guide...
Horizontal Rackmount Remote Power Manager QSG
Quick Start Guide for PS580A Series (Version 2)
20-Amp Rackmount Power Strip with Front and Rear Outlets
Black Box Explains...Remote power control.
Simply put, remote power control is the ability to reset or reboot PC, LAN, telecom, and other computer equipment without being at the equipments location.
Who needs remote power control?... more/see it nowAny organization with a network that reaches remote sites. This can include branch offices, unmanned information kiosks, remote monitoring stations, alarm and control systems, and even HVAC systems.
When equipment locks up at remote sites, it is usually up to the system manager at headquarters to reset it. Often, there arent any technically trained personnel at the remote site who can perform maintenance and resets on equipment. So, in order to save traveling time and minimize downtime, remote power control enables the system manager to take care of things at the office without ever leaving home!
Remote power control can be done with modems or existing or special phone lines. The ideal system uses out-of-band management, an alternate path over an ordinary dialup line that doesnt interfere with network equipment.
An effective remote power control system incorporates the following:
• An existing phone line, such as a line being used for a fax, modem, or phone.
• Transparent operation. The system shouldnt interfere with or be affected by normal calls.
• Security features. The system should prevent unauthorized access to network equipment.
• Flexibility. System managers should be able to dial in from anywhere and control mulitple devices with one call.
• Have power control devices that meet UL® and FCC requirements. collapse
Product Data Sheets (pdf)...APC ProtectNet
Metered Vertical PDU
20-Amp Vertical AC Power Outlet Strip