Product Data Sheets (pdf)...5.8-GHz 300-Mbps Wireless Ethernet Kit
- Quick Start Guide...
Hardened Managed Ethernet Switch Quick Start Guide
Quick Start Guide for the LEH900 Series (Version 1)
Black Box Explains…Media converters that also work as switches.
Media converters transparently convert the incoming electrical signal from one cable type and then transmit it over another type—thick coax to Thin, UTP to fiber, and so on. Traditionally, media... more/see it nowconverters were purely Layer 1 devices that only converted electrical signals and physical media and didn’t do anything to the data coming through the link.
Today’s media converters, however, are often more advanced Layer 2 Ethernet devices that, like traditional media converters, provide Layer 1 electrical and physical conversion. But, unlike traditional media converters, they also provide Layer 2 services and route Ethernet packets based on MAC address. These media converters are often called media converter switches, switching media converters, or Layer 2 media converters. They enable you to have multiple connections rather than just one simple in-and-out connection. And because they’re switches, they increase network efficiency.
Media converters are often used to connect newer 100-Mbps, Gigabit Ethernet, or ATM equipment to existing networks, which are generally 10BASE-T, 100BASE-T, or a mixture of both. They can also be used in pairs to insert a fiber segment into copper networks to increase cabling distances and enhance immunity to electromagnetic interference.
Rent an apartment…
Media converters are available in standalone models that convert between two different media types and in chassis-based models that house many media converters in a a single chassis.
Standalone models convert between two media. But, like a small apartment, they can be outgrown.
Consider your current and future applications before selecting a media converter. A good way to anticipate future network requirements is to choose media converters that work as standalone devices but can be rackmounted if needed later.
…or buy a house.
Chassis-based or modular media converter systems are normally rackmountable and have slots to house media converter modules. Like a well-planned house, the chassis gives you room to grow. These are used when many Ethernet segments of different media types need to be connected in a central location. Modules are available for the same conversions performed by the standalone converters, and they enable you to mix different media types such as 10BASE-T, 100BASE-TX, 100BASE-FX, ATM, and Gigabit modules. Although enterprise-level chassis-based systems generally have modules that can only be used in a chassis, many midrange systems feature modules that can be used individually or in a chassis. collapse
Hardened Managed Ethernet Switch User Manual
User Manual for the LEH900 Series, LEH1000 Series, LEH1100, & LEH1200 Series (Version 3)
- Quick Start Guide...
LPH1004A Series Hardened Ethernet PoE+ Switch QSG
Quick Start Guide for the LPH1004A (Version 1)
Black Box Explains... GBICs
A Gigabit Interface Converter (GBIC) is a transceiver that converts digital electrical currents to optical signals and back again. GBICs support speeds of 1 Gbps or more and are typically... more/see it nowused as an interface between a high-speed Ethernet or ATM switch and a fiber backbone. GBICs are hot-swappable, so switches dont need to be powered down for their installation. collapse
10BASE-T/100BASE-TX Ethernet extender
LB300A-R2 and R3 comparison and LED guide (LB300A-R2, LB300A-R3)
Product Data Sheets (pdf)...Vertical-Mount Managed Fiber Switch
Wireless Point-to-Point Ethernet Extender User Manual
User Manual for the LWE100A-KIT and LWE100AE-KIT (Version 1)