Black Box Explains...Digital Visual Interface (DVI) connectors.
The DVI (Digital Video Interface) technology is the standard digital transfer medium for computers while the HDMI interface is more commonly found on HDTVs, and other high-end displays.
The Digital... more/see it nowVisual Interface (DVI) standard is based on transition-minimized differential signaling (TMDS). There are two DVI formats: Single-Link and Dual-Link. Single-link cables use one TMDS-165 MHz transmitter and dual-link cables use two. The dual-link cables double the power of the transmission. A single-link cable can transmit a resolution ?of 1920 x 1200 vs. 2560 x 1600 for a dual-link cable.
There are several types of connectors: ?DVI-D, DVI-I, DVI-A, DFP, and EVC.
- DVI-D is a digital-only connector for use between a digital video source and monitors. DVI-D eliminates analog conversion and improves the display. It can be used when one or both connections are DVI-D.
- DVI-I (integrated) supports both digital and analog RGB connections. It can transmit either a digital-to-digital signals or an analog-to-analog signal. It is used by some manufacturers on products instead of separate analog and digital connectors. If both connectors are DVI-I, you can use any DVI cable, but a DVI-I is recommended.
- DVI-A (analog) is used to carry an DVI signal from a computer to an analog VGA device, such as a display. If one or both of your connections are DVI-A, use this cable. ?If one connection is DVI and the other is ?VGA HD15, you need a cable or adapter ?with both connectors.
- DFP (Digital Flat Panel) was an early digital-only connector used on some displays.
- EVC (also known as P&D, for ?Plug & Display), another older connector, handles digital and analog connections.
ServSwitch SRX User Guide
Installation and User Guide (Feb-09)
Black Box Explains... Plasma vs. LCD Screens
When deciding whether to use plasma or liquid crystal diode (LCD) displays for your applications, you need to consider many factors. Both provide brilliant color, sharp text contrast, and crystal-clear... more/see it nowimages. But the way in which plasma and LCD screens process and display incoming video/computer signals is markedly different.
Compare and contrast.
Both plasma and LCD technology provide stark enough contrasts to make displays sharp and pleasing. But when it comes to contrast output, plasma technology outperforms LCD screens. Some plasma displays have a 3000:1 contrast ratio, which is the measure of the blackest black compared to the whitest white. LCDs use electric charges to untwist liquid crystals, thereby blocking light and emitting darker pixels. Despite this process, LCD displays dont produce more than a 1000:1 contrast ratio.
Clarity thats light waves ahead.
Pixels contain enough information to produce every color in the spectrum. Because plasmas use each and every pixel on their screens, color information is reproduced more accurately. Plasma screens display moving images with remarkable clarity, though burn-in can be an issue. For displays with lots of light and dark imagery, plasma panels provide excellent performance with their high-contrast levels, color saturation, and overall brightness.
LCD displays, on the other hand, manipulate light waves and reproduce colors by subtracting colors from white light. Though this makes it more difficult to maintain color accuracy and vibrancy compared to plasma screens, LCDs have an advantage with their higher-than-average number of pixels per square inch. These additional pixels make LCD technology better at displaying static images from computers or VGA sources in full-color detail. Plus, theres no flicker and very little screen burn-in.
Applications with large amounts of data—such as those found on spreadsheets—display particularly well on LCD monitors.
Brilliant displays that go on and on.
With LCD screens, there are essentially no parts to wear out. LCD screens last as long as their backlights do, with displays lasting, on average, 50,000–75,000 hours. Thats why LCD screens are especially good for long-term applications, such as digital signage or displays that require around-the-clock use.
Plasma screens, however, use a combination of electric currents and noble gases (argon, neon, and xenon) to produce a glow, which in turn yields brilliant color. The half-life of these gases, however, is only around 25,000 hours. The glow they produce grows dimmer over time.
The right angle can make all the difference.
Plasmas light every pixel on the screen, making the brightness on the screen consistent and giving plasmas the edge when it comes to viewing angles. In fact, plasma screens have as much as a 160° viewing angle compared to LCDs. This makes viewing the images on the screen easier to see from a variety of angles. In doing so, however, plasmas consume much more power.
LCDs display at 130–140° angles, but their use of fluorescent backlighting requires much less power to operate than plasmas. This also makes LCDs less prone to burn-in or ghosting of images.
Black Box Explains...Category wiring standards
Product Data Sheets (pdf)...Wizard Multimedia Extenders
The ABCs of standards
There are two primary organizations dedicated to developing and setting structured cabling standards. In North America, standards are issued by the Telecommunications Industry Association (TIA),... more/see it nowwhich is accredited by the American National Standards Institute (ANSI). The TIA was formed in April 1988 after a merger with the Electronics Industry Association (EIA). That’s why its standards are commonly known as ANSI/TIA/EIA, TIA/EIA, or TIA.
Globally, the organizations that issue standards are the International Electrotechnical Commission (IEC) and the International Organization for Standardization (ISO). Standards are often listed as ISO/IEC. Other organizations include the Canadian Standards Association (CSA), CENELEC (European Committee for Electrotechnical Standardizations), and the Japanese Standards Association (JSA/JSI).
The committees of all these organizations work together and the performance requirements of the standards are very similar. But there is some confusion in terminology.
The TIA cabling components (cables, connecting hardware, and patch cords) are labeled with a ”category.” These components together form a permanent link or channel that is also called a ”category.” The ISO/IEC defines the link and channel requirements with a ”class” designation. But the components are called a ”category.”
Category 5 (CAT5) —ratified in 1991. It is no longer recognized for use in networking.
Category 5e (CAT5e), ISO/IEC 11801 Class D, ratified in 1999, is designed to support full-duplex, 4-pair transmission in 100-MHz applications. The CAT5e standard introduced the measurement for PS-NEXT, EL-FEXT, and PS-ELFEXT. CAT5e is no longer recognized for new installations. It is commonly used for 1-GbE installations.
Category 6 (CAT6) – Class E has a specified frequency of 250 MHz, significantly improved bandwidth capacity over CAT5e, and easily handles Gigabit Ethernet transmissions. CAT6 supports 1000BASE-T and, depending on the installation, 10GBASE-T (10-GbE).
10-GbE over CAT6 introduces Alien Crosstalk (ANEXT), the unwanted coupling of signals between adjacent pairs and cables. Because ANEXT in CAT6 10-GbE networks is so dependent on installation practices, TIA TSB-155-A and ISO/IEC 24750 qualifies 10-GbE over CAT6 over channels of 121 to 180 feet (37 to 55 meters) and requires it to be 100% tested, which is extremely time consuming. To mitigate ANEXT in CAT6, it is recommended that the cables be unbundled, that the space between cables be increased, and that non-adjacent patch panel ports be used. If CAT6 F/UTP cable is used, mitigation is not necessary and the length limits do not apply. CAT6 is not recommended for new 10-GbE installations.
Augmented Category 6 (CAT6A) –Class Ea was ratified in February 2008. This standard calls for 10-Gigabit Ethernet data transmission over a 4-pair copper cabling system up to 100 meters. CAT6A extends CAT6 electrical specifications from 250 MHz to 500 MHz. It introduces the ANEXT requirement. It also replaces the term Equal Level Far-End Crosstalk (ELFEXT) with Attenuation to Crosstalk Ratio, Far-End (ACRF) to mesh with ISO terminology. CAT6A provides improved insertion loss over CAT6. It is a good choice for noisy environments with lots of EMI. CAT6A is also well-suited for use with PoE+.
CAT6A UTP cable is significantly larger than CAT6 cable. It features larger conductors, usually 22 AWG, and is designed with more space between the pairs to minimize ANEXT. The outside diameter of CAT6A cable averages 0.29"–0.35" compared to 0.21"–0.24" for CAT6 cable. This reduces the number of cables you can fit in a conduit. At a 40% fill ratio, you can run three CAT6A cables in a 3/4" conduit vs. five CAT6 cables.
CAT6A UTP vs. F/UTP. Although shielded cable has the reputation of being bigger, bulkier, and more difficult to handle and install than unshielded cable, this is not the case with CAT6A F/UTP cable. It is actually easier to handle, requires less space to maintain proper bend radius, and uses smaller conduits, cable trays, and pathways. CAT6A UTP has a larger outside diameter than CAT6A F/UTP cable. This creates a great difference in the fill rate of cabling pathways. An increase in the outside diameter of 0.1", from 0.25" to 0.35" for example, represents a 21% increase in fill volume. In general, CAT6A F/UTP provides a minimum of 35% more fill capacity than CAT6A UTP. In addition, innovations in connector technology have made terminating CAT6A F/UTP actually easier than terminating bulkier CAT6A UTP.
Category 7 (CAT7) –Class F was published in 2002 by the ISO/IEC. It is not a TIA recognized standard and TIA plans to skip over it.
Category 7 specifies minimum performance standards for fully shielded cable (individually shielded pairs surrounded by an overall shield) transmitting data at rates up to 600 MHz. It comes with one of two connector styles: the standard RJ plug and a non-RJ-style plug and socket interface specified in IEC 61076-2-104:2.
Category 7a (CAT7a) –Class Fa (Amendment 1 and 2 to ISO/IEC 11801, 2nd Ed.) is a fully shielded cable that extends frequency from 600 MHz to 1000 MHz.
Category 8 – The TIA decided to skip Category 7 and 7A and go to Category 8. The TR-42.7 subcommittee is establishing specs for a 40-Gbps twisted-pair solution with a 2-GHz frequency. The proposed standard is for use in a two-point channel in a data center at 30 meters. It is expected to be ratified in February 2016. The TR-42.7 subcommittee is also incorporating ISO/IEC Class II cabling performance criteria into the standard. It is expected to be called TIA-568-C.2-1. The difference between Class I and Class II is that Class II allows for three different styles of connectors that are not compatible with one another or with the RJ-45 connector. Class I uses an RJ-45 connector and is backward compatible with components up to Category 6A.
Video...ServSwitch Secure KVM Switches with USB
As the need for security has grown, Black Box has made it a priority to address the concerns of customers for whom security is vital. We have been involved in... more/see it nowresearching and developing the ServSwitch Secure KVM Switches with USB, and recently obtained EAL4+ certification and Level 1 TEMPEST approval.
ServSwitch Secure KVM Switches with USB enable switching between secure and non-secure networks. The switch provides a common point of access, and because of a number of security features, data is isolated from one network to the other. The KVM switches provide control and separation of up to four PCs through just one keyboard, monitor, and mouse. Users can safely switch between four computers operating at different classification levels without worry.
View this video for more details about the ServSwitch Secure KVM Switch with USB — and now with EAL4+ certification and TEMPEST Level 1 approval. collapse
Black Box Explains...USB 2.0 and USB OTG.
The Universal Serial Bus (USB) hardware (plug-and-play) standard makes connecting peripherals to your computer easy.
USB 1.1, introduced in 1995, is the original USB standard. It has two data rates:... more/see it now12 Mbps for devices such as disk drives that need high-speed throughput and 1.5 Mbps for devices such as joysticks that need much lower bandwidth.
In 2002, a newer specification, USB 2.0, or Hi-Speed USB 2.0, gained wide acceptance in the industry. This version is both forward- and backward-compatible with USB 1.1. It increases the speed of the peripheral to PC connection from 12 Mbps to 480 Mbps, or 40 times faster than USB 1.1!
This increase in bandwidth enhances the use of external peripherals that require high throughput, such as CD/DVD burners, scanners, digital cameras, video equipment, and more. USB 2.0 supports demanding applications, such as Web publishing, in which multiple high-speed devices run simultaneously. USB 2.0 also supports Windows® XP through a Windows update.
An even newer USB standard, USB On-The-Go (OTG), is also in development. USB OTG enables devices other than a PC to act as a host. It enables portable equipment—such as PDAs, cell phones, digital cameras, and digital music players—to connect to each other without the need for a PC host.
USB 2.0 specifies three types of connectors: the A connector, the B connector, and the Mini B connector. A fourth type of connector, the Mini A (used for smaller peripherals such as mobile phones), was developed as part of the USB OTG specification. collapse
Black Box Explains...Stream mode vs. burst mode/prompt mode.
Computers and mice must communicate with each other in order to operate properly. Most computers and mice communicate via a method called “stream mode”—as a mouse is being moved, it... more/see it nowsends the coordinates of its new position in a constant stream of information.
However, some computers communicate via a method known as “burst” or “prompt” mode. With this method, the mouse holds its data until the CPU sends a request (or “prompt”) for it. This mode of communication presents a problem for many KVM switches, as they normally pass along mouse coordinates in a stream mode. This results in a CPU receiving data when it isn’t expecting it, and the mouse simply won’t function properly.
All ServSwitch™ products contain support for stream-mode CPUs, and several ServSwitch products support both stream and burst/prompt modes. Call our FREE Tech Support about requirements for your application. collapse