Loading


Categories (x) > KVM > Server Room/Enterprise KVM (x)

Results 61-70 of 74 << < 6 7 8 > 
  • Firmware... 
  • ServSwitch Octet KVM Switch Firmware
    Firmware for KV1700A, KV1701A, KV1702A, KV1703A (3.6.0.0)
 

  • Firmware... 
  • ServSwitch CX Uno Firmware
    Firmware for the KV0081A & KV0161A (Version 1.07)
 
  • Software... 
  • ServSwitch Octet KVM Switch Software
    Software for KV1700A, KV1701A, KV1702A, KV1703A (Octoware 3.4.0.0)
 
  • Pdf Drawing... 
  • ServSwitch EC KVM Switch for PS/2 and USB Servers and USB Consoles (4-Port) Drawing
    PDF Drawing for the KV9204A
 
  • Firmware... 
  • ServSwitch CX Uno USB Remote Access Module Firmware
    Firmware (Version 1.17)
 

Product Data Sheets (pdf)...ServSwitch Console Plus


Product Data Sheets (pdf)...ServSwitch EC for PS/2 and USB Servers


Black Box Explains...UTP cable and color drift.

UTP cable is often used with video or KVM extenders to extend the reach of a video signal. It’s popular for this application because it’s lightweight, easy to handle, and... more/see it nowinexpensive. But when you transmit video over long stretches of twisted-pair cable, you sometimes run into a phenomenon called color drift or color split.

Color drift shows up as that annoying colored shadow you occasionally see around objects on a video screen. It sometimes happens with UTP cable because the pairs of wire in the cable are twisted at slightly different rates to reduce crosstalk between pairs. Because of these differences between wire pairs, video signals for different colors often travel different distances before they reach the remote receiver. When one color signal arrives behind the others because its wire is longer, you get that red, green, or blue shadow around the objects on your video screen.

UTP cable varies widely by manufacturer, so before installing video extenders, it’s difficult to determine whether or not you’re going to have a color drift problem. You’re more likely to experience color drift with higher grades (CAT5e or CAT6) of cable, on longer cable runs, and on high-resolution screens.

If you experience color drift, there are several possible solutions. You can use a shorter length of cable, switch from CAT5e or CAT6 cable to CAT5 cable, use a lower screen resolution, or use a video skew compensator.

A video skew compensator removes color drift by delaying some color signals to compensate for differences in wire pairs. collapse

  • Manual... 
  • ServSwitch CX Uno User Manual
    User Manual for the KV0081A and KV0161A (Version 1)
 
Results 61-70 of 74 << < 6 7 8 > 
Close

Support

Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.



 

You have added this item to your cart.

Print
Black Box 1-877-877-2269 Black Box Network Services