Loading


Categories (x) > KVM > Extenders > Fiber (x)

Results 1-10 of 29 1 2 3 > 
  • Visio Stencil Drawing... 
  • Visio Stencil
    Stencil Drawings
 
  • Manual... 
  • ServSwitch KVM Extender/Cross Repeater Manual
    Manual for the ACX1000, ACX1000-MM, ACX1000-MS, ACX1000-DM, and ACX1000-CM
 

Product Data Sheets (pdf)...ServSwitch DKM DVI-D KVM Matrix Switch

  • Manual... 
  • ServSwitch Fiber DVI + USB Extender EC User Manual
    User Manual for the ACX310F Sand ACX310FIA (Version 4)
 

Black Box Explains...Digital Visual Interface (DVI) connectors.

DVI (Digital Video Interface) is the standard digital interface for transmitting uncompressed high-definition, 1080p video between PCs and monitors and other computer equipment. Because DVI accommodates both analog and digital... more/see it nowinterfaces with a single connector, it is also compatible with the VGA interface. DVI differs from HDMI in that HDMI is more commonly found on HDTVs and consumer electronics.

The DVI standard is based on transition-minimized differential signaling (TMDS). There are two DVI formats: Single-Link and Dual-Link. Single-link cables use one TMDS-165 MHz transmitter and dual-link cables use two. The dual-link cables double the power of the transmission. A single-link cable can transmit a resolution ?of 1920 x 1200 vs. 2560 x 1600 for a dual-link cable.

There are several types of connectors: DVI-D, DVI-I, DVI-A, DFP, and EVC.

DVI-D (digital). This digital-only interface provides a high-quality image and fast transfer rates between a digital video source and monitors. It eliminates analog conversion and improves the display. It can be used when one or both connections are DVI-D.

DVI-I (integrated). This interface supports both digital and analog RGB connections. It can transmit either a digital-to-digital signal or an analog-to-analog signal. It can be used with adapters to enable connectivity to a VGA or DVI-I display or digital connectivity to a DVI-D display. If both connectors are DVI-I, you can use any DVI cable, but DVI-I is recommended.

DVI-A (analog) This interface is used to carry a DVI signal from a computer to an analog VGA device, such as a display. If one connection is DVI and the other is VGA HD15, you need a cable or adapter with both connectors.

DFP (Digital Flat Panel) was an early digital-only connector used on some displays.

EVC (also known as P&D, for Plug & Display), another older connector, handles digital and analog connections.

collapse

  • Manual... 
  • ServSwitch Fiber CWDM Mux/Demux Manual
    Manual for the ACXCWDM4.
 
  • Manual... 
  • ServSwitch DVI/VGA CATx Extender Manual
    Manual for ACS253A-CT, ACS253A-U-MM-R2, ACS253A-MM, ACS253A-U-SM-R2 and ACS253A-SM (Version 2)
 

Black Box Explains...Digital Visual Interface (DVI) and other digital display interfaces.

There are three main types of digital video interfaces: P&D, DFP, and DVI. P&D (Plug & Display, also known as EVC), the earliest of these technologies, supports both digital and... more/see it nowanalog RGB connections and is now used primarily on projectors. DFP (Digital Flat-Panel Port) was the first digital-only connector on displays and graphics cards; it’s being phased out.

There are different types of DVI connectors: DVI-D, DVI-I, DVI-A, DFP, and EVC.

DVI-D is a digital-only connector. DVI-I supports both digital and analog RGB connections. Some manufacturers are offering the DVI-I connector type on their products instead of separate analog and digital connectors. DVI-A is used to carry an analog DVI signal to a VGA device, such as a display. DFP, like DVI-D, was an early digital-only connector used on some displays; it’s being phased out. EVC (also known as P&D) is similar to DVI-I only it’s slightly larger in size. It also handles digital and analog connections, and it’s used primarily on projectors.

All these standards are based on transition-minimized differential signaling (TMDS). In a typical single-line digital signal, voltage is raised to a high level and decreased to a low level to create transitions that convey data. TMDS uses a pair of signal wires to minimize the number of transitions needed to transfer data. When one wire goes to a high-voltage state, the other goes to a low-voltage state. This balance increases the data-transfer rate and improves accuracy. collapse

  • Brochure... 
  • Broadcast and Media Solutions
    Enabling next-generation connectivity solutions for broadcast and media professionals.
 
  • Manual... 
  • ServSwitch Brand DVI-D USB KVM-over-Fiber Extender Manual
    Manual for the ACS260A-U-MM
 
Results 1-10 of 29 1 2 3 > 
Close

Support

Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.



 

You have added this item to your cart.

Important message about your cart:

You requested more of "" than the currently available. The quantity has been changed to them maximum quantity available. View your cart.

Print
Black Box 1-800-316-7107 Black Box Network Services