Loading


Categories (x) > KVM > Desktop > 4-Port (x)

Results 21-30 of 47 < 1 2 3 4 5 > 

Black Box Explains...Digital Visual Interface (DVI) cables.

The Digital Visual Interface (DVI) standard is based on transition-minimized differential signaling (TMDS). In a typical single-line digital signal, voltage is raised to a high level and decreased to a... more/see it nowlow level to create transitions that convey data. To minimize the number of transitions needed to transfer data, TMDS uses a pair of signal wires. When one wire goes to a high-voltage state, the other goes to a low-voltage state. This balance increases the data-transfer rate and improves accuracy.

There are different types of DVI connectors: DVI-D, DVI-I, DVI-A, DFP, and EVC. DVI-D is a digital-only connector.

DVI-D is a digital-only connector. DVI-I supports both digital and analog RGB connections. Some manufacturers are offering the DVI-I connector type on their products instead of separate analog and digital connectors. DVI-A is used to carry an analog DVI signal to a VGA device, such as a display. DFP, like DVI-D, was an early digital-only connector used on some displays; it’s being phased out. EVC (also known as P&D) is similar to DVI-I only it’s slightly larger in size. It also handles digital and analog connections, and it’s used primarily on projectors. collapse


Black Box Explains...Digital Visual Interface (DVI) and other digital display interfaces.

There are three main types of digital video interfaces: P&D, DFP, and DVI. P&D (Plug & Display, also known as EVC), the earliest of these technologies, supports both digital and... more/see it nowanalog RGB connections and is now used primarily on projectors. DFP (Digital Flat-Panel Port) was the first digital-only connector on displays and graphics cards; it’s being phased out.

There are different types of DVI connectors: DVI-D, DVI-I, DVI-A, DFP, and EVC.

DVI-D is a digital-only connector. DVI-I supports both digital and analog RGB connections. Some manufacturers are offering the DVI-I connector type on their products instead of separate analog and digital connectors. DVI-A is used to carry an analog DVI signal to a VGA device, such as a display. DFP, like DVI-D, was an early digital-only connector used on some displays; it’s being phased out. EVC (also known as P&D) is similar to DVI-I only it’s slightly larger in size. It also handles digital and analog connections, and it’s used primarily on projectors.

All these standards are based on transition-minimized differential signaling (TMDS). In a typical single-line digital signal, voltage is raised to a high level and decreased to a low level to create transitions that convey data. TMDS uses a pair of signal wires to minimize the number of transitions needed to transfer data. When one wire goes to a high-voltage state, the other goes to a low-voltage state. This balance increases the data-transfer rate and improves accuracy. collapse


Black Box Explains...Stream mode vs. burst mode/prompt mode.

Computers and mice must communicate with each other in order to operate properly. Most computers and mice communicate via a method called “stream mode”—as a mouse is being moved, it... more/see it nowsends the coordinates of its new position in a constant stream of information.

However, some computers communicate via a method known as “burst” or “prompt” mode. With this method, the mouse holds its data until the CPU sends a request (or “prompt”) for it. This mode of communication presents a problem for many KVM switches, as they normally pass along mouse coordinates in a stream mode. This results in a CPU receiving data when it isn’t expecting it, and the mouse simply won’t function properly.

All ServSwitch™ products contain support for stream-mode CPUs, and several ServSwitch products support both stream and burst/prompt modes. Call our FREE Tech Support about requirements for your application. collapse


Product Data Sheets (pdf)...ServSwitch DT DVI 4-Port with USB 2.0 Transparent


Product Data Sheets (pdf)...Multi-Head ServSwitch

  • Software... 
  • ServSwitch Freedom Sofware
    Software for the KV0004A (Version 1.5)
 


  • Manual... 
  • ServSwitch DT KVM Switch DisplayPort (4-Port) User Manual
    User Manual for the KV9804A (Version 1)
 
  • Manual... 
  • ServSwitch Freedom User Manual
    User Manual for the KV0004A (Version 2-0b)
 
Results 21-30 of 47 < 1 2 3 4 5 > 
Close

Support

Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.



 
Print
Black Box 1-877-877-2269 Black Box Network Services