Loading


Categories (x) > Jacks, Panels, & Hardware > Copper Patch Panels (x)

Results 71-80 of 91 << < 6 7 8 9 10 > 

Black Box Explains...Augmented Category 6 (CAT6A).


Augmented Category 6 (CAT6a)–Class Ea was ratified in February 2008. This standard calls for 10-Gigabit Ethernet data transmission over a 4-pair copper cabling system up to 100 meters. CAT6a extends... more/see it nowCAT6 electrical specifications from 250 MHz to 500 MHz. It introduces the ANEXT requirement. It also replaces the term Equal Level Far-End Crosstalk (ELFEXT) with Attenuation to Crosstalk Ratio, Far-End (ACRF) to mesh with ISO terminology. CAT6a provides improved insertion loss over CAT6. It is a good choice for noisy environments with lots of EMI. CAT6a is also well-suited for use with PoE+.

CAT6a UTP cable is significantly larger than CAT6 cable. It features larger conductors, usually 22 AWG, and is designed with more space between the pairs to minimize ANEXT. The outside diameter of CAT6a cable averages 0.29–0.35" compared to 0.21–0.24" for CAT6 cable. This reduces number of cables you can fit in a conduit. At a 40% fill ratio, you can run three CAT6a cables in a 3/4" conduit vs. five CAT6 cables.

There are two types of CAT6a cable, UTP and F/UTP.

collapse

  • Pdf Drawing... 
  • GigaStation2 High-Density Multimedia Patch Panel (24-Port, 1U) PDF Drawing
    PDF Drawing for the JPMT1024A
 
  • Pdf Drawing... 
  • Wallmount CAT5e Patch Panel (24-Port)
    PDF Drawing for the JPM085A-R3
 
  • Pdf Drawing... 
  • SpaceGAIN CAT6 45 Degree Angled-Port Patch Panel (48-Port, Down-Up) PDF Drawing
    PDF Drawing for the JPM648-45ANG-DU
 

Black Box Explains...Category 6.

Category 6 (CAT6)–Class E has a specified frequency of 250 MHz, significantly improved bandwidth capacity over CAT5e, and easily handles Gigabit Ethernet transmissions. In recent years, it has been the... more/see it nowcable of choice for new structured cabling systems. CAT6 supports 1000BASE-T and, depending on the installation, 10GBASE-T (10-GbE).

10-GbE over CAT6 introduces the problem of Alien Crosstalk (ANEXT), the unwanted coupling of signals between adjacent pairs and cables. Because ANEXT in CAT6 10-GbE networks is so dependent on installation practices, TSB-155 qualifies 10-GbE over CAT6 up to 55 meters and requires it to be 100% tested. To mitigate ANEXT in CAT6, it is recommended that you unbundle the cables and increase the separation between the cables.

You can always contact Black Box Tech Support to answer your cabling questions. Our techs can recommend cable testers and steer you in the right direction when you’re installing new cabling. And the advice is FREE! collapse

  • Pdf Drawing... 
  • SpaceGAIN CAT5e High-Density Feed-Through Patch Panel (Unshielded, 48-Port, 1U) Drawing
    PDF Drawing for the JPM810A-HD.
 
  • Manual... 
  • 48-Port CAT5e Feed-Through Patch Panel (Unshielded) User Manual
    User Manual for JPM810A-R2 (Version 2)
 
  • Pdf Drawing... 
  • CAT6a Blank Patch Panel (24-Port, 19", 1.75"H, 1U) PDF Drawing
    PDF Drawing for the JPMT700A
 
  • Pdf Drawing... 
  • SpaceGAIN 45%XB0 Angled-Port Side-Exit Multimedia Patch Panel (24-Port) PDF Drawing
    PDF Drawing for the JPMT1024-ANG
 

Product Data Sheets (pdf)...GigaTrue CAT6 Channel Solution

Results 71-80 of 91 << < 6 7 8 9 10 > 
Close

Support

Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.



 

You have added this item to your cart.

Print
Black Box 1-877-877-2269 Black Box Network Services