Loading


Categories (x) > Jacks, Panels, & Hardware > Copper Patch Panels (x)

Results 1-10 of 91 1 2 3 4 5 > >> 
  • Manual... 
  • SpaceGAIN CAT5e Half-U Patch Panel (24-Port, Unshielded) Manual
    Manual for the JPM5E24A-HU (Version 1)
 
  • Pdf Drawing... 
  • SpaceGAIN CAT6 45 Degree Angled-Port Patch Panel (48-Port, Down-Up) PDF Drawing
    PDF Drawing for the JPM648-45ANG-DU
 
  • Pdf Drawing... 
  • CAT5e Feed-Through Patch Panel (Unshielded, 48-Port) Drawing
    PDF Drawing for the JPM820A.
 
  • Pdf Drawing... 
  • CAT5e 100-Pair Wiring Block Kit PDF Drawing
    PDF Drawing for the JPT5E100-5PR
 
  • Manual... 
  • GigaTrue CAT6 Patch Panel User Manual
    User Manual for the JPM610A-R7, JPM612A-R7, and JPM614A-R7 (Version 1)
 
  • Pdf Drawing... 
  • SpaceGAIN CAT6 45 Degree Angled-Port Patch Panels (48-Port, Up-Up) PDF Drawing
    PDF Drawing for the JPM648-45ANG-UU
 
  • Pdf Drawing... 
  • GigaStation2 High-Density Multimedia Patch Panel (16-Port, 1U) PDF Drawing
    PDF Drawing for the JPMT1016A
 

Black Box Explains...10-GbE, CAT6A, and ANEXT.

The IEEE released the 802.3an 10GBASE-T standard in June 2006. This standard specifies 10-Gbps data transmission over four-pair copper cabling. 10-Gigabit Ethernet (10-GbE) transmission includes up to 37 meters of... more/see it nowCAT6 cable (with installation mitigation techniques), 100 meters of Augmented Category 6 (CAT6A) UTP or F/UTP cable or 100 meters of S/FTP CAT7/Class F cable.

CAT6A is the ANSI/TIA 10-Gigabit Ethernet (10-GbE) over copper standard. Its requirements are covered in ANSI/TIA-568-C.2 (Balanced Twisted-Pair Communications Cabling and Components Standard) published in August 2009. It defines 10-Gigabit data transmission over a 4-connector twisted-pair CAT6A copper cable for a distance of 100 meters.

Category 6A cabling is designed to support next-generation applications, including the transfer of large amounts of data at high speeds, up to 10 Gbps. CAT6A extends electrical specifications to 500 MHz from 250 MHz for CAT6 cabling. CAT6A cables are fully backward compatible with previous categories, including CAT6 and 5e. Category 6A is also designed to support bundled cable installations up to 100 meters and PoE+ low-power implementations. The standard includes the performance parameter, Alien Crosstalk (ANEXT). Because of its higher performance transmission speeds and higher MHz rating, CAT6A cable needs to be tested for external noise outside the cable, which wasn’t a concern with previous cabling categories. CAT6A UTP also has a much larger diameter than previous cables.

Alien crosstalk (ANEXT) is a critical and unique measurement in 10-GbE systems. Crosstalk, measured in 10/100/1000BASE-T systems, is the mixing of signals between wire pairs within a cable. Alien Crosstalk, in 10-GbE systems, is the measurement of the unwanted signal coupling between wire pairs in different and adjacent cables or from one balanced twisted-pair component, channel, or permanent link to another.

The amount of ANEXT depends on a number of factors, including the type of cable, cable jacket, cable length, cable twist density, proximity of adjacent cables, and connectors, and EMI. Patch panels and connecting hardware are also affected by ANEXT.

With Alien Crosstalk, the affected cable is called the victim cable. The surrounding cables are the disturber cables.

There are a number of ways to mitigate the effects of ANEXT in CAT6A runs. According to the standards, ANEXT can be improved by laying CAT6A UTP cable loosely in pathways and raceways with space between the cables. This contrasts to the tightly bundled runs of CAT6/5e cable that we are used to. The tight bundles present a worst-case scenario of six cables around one, thus the center cable would be adversely affected by ANEXT. CAT6A UTP cable needs to be tested for ANEXT. This is a complex and time-consuming process in which all possible wire-pair combinations need to be tested for ANEXT and far-end ANEXT. It can take 50 minutes to test one link in a bundle of 24 CAT 6A UTP cables.

To virtually eliminate the problem of ANEXT, you can use CAT6A F/UTP cable. The F indicates an outer foil shield encasing four unshielded twisted pairs. This cable is also a good choice when security is an issue because it doesn’t emit signals. In addition, CAT6A F/UTP cable works well in noisy environments with a lot of EMI/RFI.

Installation of CAT6A F/UTP is simpler, too, because the cable features a smaller outside diameter than CAT6A UTP. Its construction makes it easier to pull and more resilient. The cable also has a smaller diameter so you can run more cables in a conduit or pathway, and have greater patch panel port density.

For more information, see the CAT6A F/UTP vs. UTP: What You Need to Know white paper in the Resources section at blackbox.com. collapse


Product Data Sheets (pdf)...LockPORT Security Patch Cables

  • Pdf Drawing... 
  • CAT5e Wiring Blocks with Legs (Type 110, 100-Pair) PDF Drawing
    PDF Drawing for the JPT5E100
 
Results 1-10 of 91 1 2 3 4 5 > >> 
Close

Support

Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.



 

You have added this item to your cart.

Print
Black Box 1-877-877-2269 Black Box Network Services