Loading


Categories (x) > Digital Signage > Presentation Tools > USB (x)
Content Type (x) > Black Box Explains (x)

Results 1-2 of 2 1 

Black Box Explains...USB 2.0 and USB OTG.

The Universal Serial Bus (USB) hardware (plug-and-play) standard makes connecting peripherals to your computer easy.

USB 1.1, introduced in 1995, is the original USB standard. It has two data rates:... more/see it now12 Mbps for devices such as disk drives that need high-speed throughput and 1.5 Mbps for devices such as joysticks that need much lower bandwidth.

In 2002, a newer specification, USB 2.0, or Hi-Speed USB 2.0, gained wide acceptance in the industry. This version is both forward- and backward-compatible with USB 1.1. It increases the speed of the peripheral to PC connection from 12 Mbps to 480 Mbps, or 40 times faster than USB 1.1!

This increase in bandwidth enhances the use of external peripherals that require high throughput, such as CD/DVD burners, scanners, digital cameras, video equipment, and more. USB 2.0 supports demanding applications, such as Web publishing, in which multiple high-speed devices run simultaneously. USB 2.0 also supports Windows® XP through a Windows update.

An even newer USB standard, USB On-The-Go (OTG), is also in development. USB OTG enables devices other than a PC to act as a host. It enables portable equipment—such as PDAs, cell phones, digital cameras, and digital music players—to connect to each other without the need for a PC host.

USB 2.0 specifies three types of connectors: the A connector, the B connector, and the Mini B connector. A fourth type of connector, the Mini A (used for smaller peripherals such as mobile phones), was developed as part of the USB OTG specification. collapse


Black Box Explains...USB.

The Universal Serial Bus (USB) hardware (plug-and-play) standard makes connecting peripherals to your computer easy. USB 1.1, introduced in 1995, is the original USB standard. It has two data rates:... more/see it now12 Mbps and 1.5 Mbps. USB 2.0, or Hi-Speed USB 2.0, was released in 2000. It increased the peripheral-to-PC speed from 12 Mbps to 480 Mbps, or 40 times faster than USB 1.1. This increase in bandwidth enabled the use of peripherals requiring higher throughput, such as CD/DVD burners, scanners, digital cameras, and video equipment. It is backward-compatible with USB 1.1.

The newest USB standard, USB 3.0 (or SuperSpeed USB), (2008) provides vast improvements over USB 2.0. It promises speeds up to 4.8 Gbps, nearly ten times that of USB 2.0. USB 3.0 has the flat USB Type A plug, but inside there is an extra set of connectors and the edge of the plug is blue instead of white. The Type B plug looks different with an extra set of connectors.

USB 3.0 adds a physical bus running in parallel with the existing 2.0 bus. USB 3.0 cable contains nine wires, four wire pairs plus a ground. It has two more data pairs than USB 2.0, which has one pair for data and one pair for power. The extra pairs enable USB 3.0 to support bidirectional async, full-duplex data transfer instead of USB 2.0’s half-duplex polling method.

USB 3.0 provides 50% more power than USB 2.0 (150 mA vs 100 mA) to unconfigured devices and up to 80% more power (900 mA vs 500 mA) to configured devices. Also, USB 3.0 conserves more power when compared to USB 2.0, which uses power when the cable isn’t being used. collapse

Results 1-2 of 2 1 
Close

Support

Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.



 
Print
Black Box 1-877-877-2269 Black Box Network Services