Loading


Categories (x) > Datacom > Switches > Manual (x)

Results 21-30 of 39 < 1 2 3 4 > 

Black Box Explains...10-Gigabit Ethernet.

10-Gigabit Ethernet (10-GbE), ratified in June 2002, is a logical extension of previous Ethernet versions. 10-GbE was designed to make the transition from LANs to Wide Area Networks (WANs) and... more/see it nowMetropolitan Area Networks (MANs). It offers a cost-effective migration for high-performance and long-haul transmissions at up to 40 kilometers. Its most common application now is as a backbone for high-speed LANs, server farms, and campuses.

10-GbE supports existing Ethernet technologies. It uses the same layers (MAC, PHY, and PMD), and the same frame sizes and formats. But the IEEE 802.3ae spec defines two sets of physical interfaces: LAN (LAN PHY) and WAN (WAN PHY). The most notable difference between 10-GbE and previous Ethernets is that 10-GbE operates in full-duplex only and specifies fiber optic media.

At a glance—Gigabit vs. 10-Gigabit Ethernet

Gigabit
• CSMA/CD + full-duplex
• Leveraged Fibre Channel PMDs
• Reused 8B/10B coding
• Optical/copper media
• Support LAN to 5 km
• Carrier extension

10-Gigabit Ethernet
• Full-duplex only
• New optical PMDs
• New coding scheme 64B/66B
• Optical (developing copper)
• Support LAN to 40 km
• Throttle MAC speed for WAN
• Use SONET/SDH as Layer 1 transport

The alphabetical coding for 10-GbE is as follows:
S = 850 nm
L = 1310 nm
E = 1550 nm
X = 8B/10B signal encoding
R = 66B encoding
W = WIS interface (for use with SONET).

10-GbE
10GBASE-SR — Distance: 300 m; Wavelength: 850 nm; Cable: Multimode
10GBASE-SW — Distance: 300 m; Wavelength: 850 nm; Cable: Multimode
10GBASE-LR — Distance: 10 km; Wavelength: 1310 nm; Cable: Single-Mode
10GBASE-LW — Distance: 10 km; Wavelength: 1310 nm; Cable: Single-Mode
10GBASE-LX4 — Distance: Multimode 300 m, Single-Mode 10 km; Wavelength: Multimode 1310 nm, Single-Mode WWDM; Cable: Multimode or Single-Mode
10GBASE-ER — Distance: 40 km; Wavelength: 1550 nm; Cable: Single-Mode
10GBASE-EW — Distance: 40 km; Wavelength: 550 nm; Cable: Single-Mode
10GBASE-CX4* — Distance: 15 m; Wavelength: Cable: 4 x Twinax
10GBASE-T* — Distance: 25–100 m; Wavelength: Cable: Twisted Pair
* Proposed for copper. collapse


Black Box Explains...Types of KVM switches.

Black Box has the keyboard/video switches you need to share one CPU between several workstations or to control several CPUs from one monitor and keyboard.

If you do a lot of... more/see it nowswitching, you need premium switches—our top-of-the-line ServSwitch™ KVM switches give you the most reliable connections for the amount of KVM equipment supported. With ServSwitch KVM switches, you can manage as many CPUs as you want from just one workstation, and you can access any server in any computer room from any workstation. Eliminating needless equipment not only saves you money, it also gives you more space and less clutter. Plus, you can switch between PCs, Sun®, and Mac® CPUs. ServSwitch KVM switches can also cut your electricity and cooling costs because by sharing monitors, you use less power and generate less heat.

If your switching demands are very minor, you may not need products as advanced as ServSwitch. Black Box offers switches to fill less demanding needs. Most of these are manual switches or basic electronic switches, which don’t have the sophisticated emulation technology used by the ServSwitch.

For PCs with PS/2® keyboards, try our Keyboard/Video Switches. They send keyboard signals, so your CPUs boot up as though they each have their own keyboard.

With the RS/6000™ KVM Switch, you can run up to six RS/6000 servers from one workstation. Our Keyboard/ Video Switch for Mac enables you to control up to two Mac CPUs from one keyboard and monitor.

With BLACK BOX® KVM Switches, you can share a workstation with two or four CPUs. They’re available in IBM® PC and Sun Workstation® configurations.

You’ll also find that our long-life manual Keyboard/Video Switches are perfect for basic switching applications. collapse




Black Box Explains... Single-Mode Fiber Optic Cable

Multimode fiber cable has multiple modes of propagation—that is, several wavelengths of light are normally used in the fiber core. In contrast, single-mode fiber cable has only one mode of... more/see it nowpropagation: a single wavelength of light in the fiber core. This means there’s no interference or overlap between the different wavelengths of light to garble your data over long distances like there is with multimode cable.

What does this get you? Distance–up to 50 times more distance than multimode fiber cable. You can also get higher bandwidth. You can use a pair of single-mode fiber strands full-duplex for up to twice the throughput of multimode fiber cable. The actual speed and distance you get will vary with the devices used with the single-mode fiber. collapse


Product Data Sheets (pdf)...Rackmountable Modem, Telco, and DB-Style Manual Switches


Product Data Sheets (pdf)...Rackmountable DB25 Manual Switches




Results 21-30 of 39 < 1 2 3 4 > 
Close

Support

Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.



 

You have added this item to your cart.

Print
Black Box 1-877-877-2269 Black Box Network Services