Loading


Categories (x) > Datacom > Extenders and Line Drivers (x)

Results 51-60 of 77 << < 6 7 8 > 

Black Box Explains... Industrial modem benefits.

Not all modems shuttle data in air-conditioned, climate-controlled comfort. And modems that operate in cozy environments have absolutely no business being exposed to harsh industrial conditions or to the elements.

But... more/see it nowjust because you work in a rough-and-tumble place doesn’t mean you have to sacrifice the convenience of a good modem. Instead, you should opt for an industrial modem. There are many industrial modems built for various degrees of extremity.

Survivability depends on reliability.
Sure, standard modems give you access to data in remote sites or enable you to service equipment on the plant floor—and you can do all this from the convenience of your office. However, these benefits are only possible if your modem can continue to function in its environment. And since standard modems aren’t built for adverse conditions, they’re not going to be reliable.

No penalties for interference.
Electrical control equipment—such as motors, relays, compressors, and generators—emit electromagnetic interference (EMI) that can affect the performance and reliability of a standard telephone modem.

EMI is emitted through power lines, the RS-232 communications cable, or through the telephone line itself. The very means of data communication, cable, is often the worst enemy of the standard modems that use it.

An industrial modem, on the other hand, has filters and superior EMI immunity to protect itself and your data. If you build your electrical cabinets to UL® or CSA standards, remember that your modem must also conform to UL® standard 508.

They go to extremes.
Temperature is the biggest killer of electronic equipment in industrial environments. The heat generated by industrial equipment in sealed enclosures or where space is a premium can make the temperature as much as 50 °F higher than the surrounding environment.

So standard modems can’t take the heat. But what about being outdoors in the other extreme, cold weather? Well, standard modems can’t take the cold either.

If you install your equipment in remote outdoor locations, it must work on the coldest days— especially those cold days when you least want to get in the car and go to the site to repair a standard modem that froze up.

Whether they’re placed in manufacturing environments or the great outdoors, industrial modems get the data through when you need it. They go to extremes for you.

Heavy metal for all kinds of banging around.
Industrial modems are built with durable metal enclosures that protect circuitry in rough conditions and ward off signal-disrupting EMI. Plus, they feature steel-bolt flanges to anchor them. In short, industrial modems can take the physical, heavy-duty punishment thrown their way.

So where exactly can you use an industrial modem?
• Heavy industry and manufacturing
• Oil and gas fields
• Refineries
• Storage sites
• Utility substations
• Agricultural projects
• Military facilities
• Research installations
• Water/wastewater systems

…and another thing!
If dedicated copper lines can’t be run through industrial environments, or if the fiber optic option is cost-prohibitive, there are also wireless industrial modems that make line-of-sight connections. If there’s a way to get the data through, industrial modems will get the job done.

Industrial-strength assurance.
Industrial modems remain in service for a very long time. But if you ever need a replacement that is hardware or software compatible, be assured that Black Box continues to support its products year after year—so you don’t spend your time re-engineering systems if you have to make a replacement. collapse

  • Manual... 
  • FlexPoint T1/E1 to Fiber Line Driver
    Installation and User Guide (Dec-04)
 
  • Manual... 
  • Fiber Optic Multipoint Line Driver-ST
    Installation and User guide (Feb-98)
 

Black Box Explains...RS-232.

RS-232, also known as RS-232C and TIA/EIA-232-E, is a group of electrical, functional, and mechanical specifications for serial interfaces between computers, terminals, and peripherals. The RS-232 standard was developed by... more/see it nowthe Electrical Industries Association (EIA), and defines requirements for connecting data communications equipment (DCE)—modems, converters, etc.—and data terminal equipment (DTE)—computers, controllers, etc.) devices. RS-232 transmits data at speeds up to 115 Kbps and over distances up to 50 feet (15.2 m).

The standard, which is functionally equivalent to ITU V.24/V.28, specifies the workings of the interface, circuitry, and connector pinning. Both sync and async binary data transmission fall under RS-232. Although RS-232 is sometimes still used to transmit data from PCs to peripheral devices, the most common uses today are for network console ports and for industrial devices.

Even though RS-232 is a “standard,” you can’t necessarily expect seamless communication between two RS-232 devices. Why? Because different devices have different circuitry or pinning, and different wires may be designated to perform different functions.

The typical RS-232 connector is DB25, but some PCs and other data communication devices have DB9 connectors and many newer devices have RJ-45 RS-232 ports. To connect 9-pin PC ports or RJ-45 to devices with 25-pin connectors, you will require a simple adapter cable. collapse

  • Manual... 
  • USB Ultimate Extender over UTP (2-Port) with Remote Power Manual
    Manual for the IC402A
 

Product Data Sheets (pdf)...FlexPoint RS-232 to Fiber Converters

  • Manual... 
  • USB Ultimate Extender over Multimode Fiber (4-Port) User Manual
    User Manual for the IC404A
 

Black Box Explains... Spread Spectrum wireless technology.

Frequency-Hopping Spread Spectrum wireless communication provides error-free transmission, top security, and high levels of throughput without the need for an FCC site license. The key to Spread Spectrum is a... more/see it nowfrequency-hopping transceiver.

Narrow-band frequency hoppers use a predefined algorithm to maintain synchronization and high throughput between master and remote modems. They achieve this by continually switching or “hopping” from one transmission frequency to another throughout the Spread Spectrum band. The sequence of frequencies is very difficult to predict and thus nearly impossible to eavesdrop on or jam. If interference is encountered at any particular frequency, the built-in error correction detects it and resends the data packet at the next frequency hop. Because EMI/RFI interference rarely affects the entire available bandwidth, and each frequency hop is at least 6 MHz, the radio transmitter has access to as many as 100 frequencies within the spectrum to avoid interference and ensure that data gets through. collapse


Product Data Sheets (pdf)...T1 and E1 Extenders for Copper

  • Quick Start Guide... 
  • USB 2.0 Ultimate Extender (CAT5, 1-Port) Quick Start Guide
    Quick Start Guide for the IC401A (Version 2)
 
Results 51-60 of 77 << < 6 7 8 > 
Close

Support

Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.



 

You have added this item to your cart.

Important message about your cart:

You requested more of "" than the currently available. The quantity has been changed to them maximum quantity available. View your cart.

Print
Black Box 1-800-316-7107 Black Box Network Services