Black Box products can be conveniently purchased
through a broad range of qualified distributors
and resellers located around the globe.
Black Box delivers solutions from our manufacturing
Click here for our solution partner directory.
Get fast answers from one of our Experts.
Helping you is our priority at Black Box.
You can contact us by phone, fax, email, or chat with one of our Experts for immediate assistance.
Helping you is our priority at Black Box.You can contact us by phone, fax, or email with one of our Experts for immediate assistance.
A technical expert will call you within 30 seconds.
It's live and it's free.
Get fast answers
from one of our
Helping you is our priority at Black
Box. You can contact us by phone,
fax, or email with one of our Experts for immediate assistance.
We're available from 9:00 am - 5:30 pm
We'll answer in 60 minutes!
We’ll respond in 60 seconds or less!
We'll answer in 60 minutes!
(8 AM-5 PM Eastern)
(24x7, 365 days a year)
One of the most important cable measurements is Near-End Crosstalk (NEXT). Its signal interference from one pair that adversely affects another pair on the same end. Not only can crosstalk... more/see it nowoccur between adjacent wire pairs (pair-to-pair NEXT), but all other pairs in a UTP cable can also contribute their own levels of both near-end and far-end crosstalk, multiplying the adverse effects of this interference onto a transmitting or receiving wire pair.Because such compounded levels of interference can prove crippling in high-speed networks, some cable manufacturers have begun listing Power Sum NEXT (PS-NEXT), FEXT, ELFEXT, and PS-ELFEXT ratings for their CAT5e and CAT6 cables. Here are explanations of the different types of measurements:NEXT measures an unwanted signal transmitted from one pair to another on the near end.PS-NEXT (Power Sum crosstalk) is a more rigorous crosstalk measurement that includes the total sum of all interference that can possibly occur between one pair and all the adjacent pairs in the same cable sheath. It measures the unwanted signals from multiple pairs at the near end onto another pair at the near end.FEXT (Far-End crosstalk) measures an unwanted signal from a pair transmitting on the near end onto a pair at the far end. This measurement takes full-duplex operation into account where signals are generated simultaneously on both ends. ELFEXT (Equal-Level Far-End Crosstalk) measures the FEXT in relation to the received signal level measured on that same pair. It basically measures interference without the effects of attenuationthe equal level.PS-ELFEXT (Power Sum Equal-Level Far-End Crosstalk), an increasingly common measurement, measures the total sum of all intereference from pairs on the far end to a pair on the near end without the effects of attenuation. collapse
From DisplayPort cables and RG-6 quad-shield coax to handy retractable cables, this webinar covers all the latest new cabling products.
Category 7/Class F (ISO/IEC 11801:2002) specifies a frequency range of 1–600 MHz over 100 meters of fully shielded twisted-pair cabling. It encompasses four individually shielded pairs inside an overall shield,... more/see it nowcalled Shielded/Foiled Twisted Pair (S/FTP) or Foiled/ Foiled Twisted Pair (F/FTP). There is a pending class Fa, based on the use of S/FTP cable to 1000 MHz. It can support 10GBASE-T transmissions.
With both types of cable, each twisted pair is enclosed in foil. In S/FTP cable, all four pairs are encased in an overall metal braid. In F/FTP, the four pairs are encased in foil.
Category 7/Class F cable can be terminated with two interface designs as specified in IEC 6063-7-7 and IEC 61076-3-104. One is an RJ-45 compatible GG-45 connector. The other is the more common TERA connector, which was launched in 1999.
Category 7/Class F is backwards compatible with traditional CAT6 and CAT5 cable, but it has far more stringent specifications for crosstalk and system noise. The fully shielded cable virtually eliminates crosstalk between the pairs. In addition, the cable is noise resistant, which makes the Category 7/Class F systems ideal for high EMI areas, such as industrial and medical imaging facilities.
Category 7/Class F cable can also increase security by preventing the emission of data signals from the cable to nearby areas. collapse
Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.
You have added this item to your cart.
Important message about your cart:
You requested more of "" than the currently available. The quantity has
been changed to them maximum quantity available. View your cart.