Loading


Categories (x) > Cables > Copper Bulk Cables (x)

Results 81-90 of 138 << < 6 7 8 9 10 > >> 
  • Pdf Drawing... 
  • GigaTrue%XAE 550 CAT6, 550-MHz Solid Bulk Cable (4-Pair, PVC Yellow) PDF Drawing
    PDF Drawing for the EYN872A-PB-1000 (1)
 
  • Specification Sheet... 
  • CAT6 400-MHz Shielded Solid Bulk Cable (F/UTP) (PVC, Yellow) Spec Sheet
    Specification Sheet for the EVNSL0604A-1000
 
  • Specification Sheet... 
  • CAT5e Shielded 350-MHz Solid Bulk Cable (STP) (24 AWG, 4-Pair, PVC, Black) Spec Sheet
    Specification Sheet for the EVNSL0508A-1000
 
  • Specification Sheet... 
  • GigaTrue 550 CAT6, 550-MHz Stranded Bulk Cable, 4-Pair, PVC, 24 AWG, Purple, 1000-ft. (304.8-m)
 
  • Specification Sheet... 
  • CAT5e Shielded 350-MHz Solid Bulk Cable (STP), (24 AWG, 4-Pair, PVC, Blue) Spec Sheet
    Specification Sheet for the EVNSL0501A-1000
 

Black Box Explains...Solid vs. stranded cable.

Solid-conductor cable is designed for backbone and horizontal cable runs. Use it for runs between two wiring closets or from the wiring closet to a wallplate. Solid cable shouldn’t be... more/see it nowbent, flexed, or twisted repeatedly. Its attenuation is lower than that of stranded-conductor cable.

Stranded cable is for use in shorter runs between network interface cards (NICs) and wallplates or between concentrators and patch panels, hubs, and other rackmounted equipment. Stranded-conductor cable is much more flexible than solid-core cable. However, attenuation is higher in stranded-conductor cable, so the total length of stranded cable in your system should be kept to a minimum to reduce signal degradation. collapse

  • Specification Sheet... 
  • CAT6 400-MHz Shielded Solid Bulk Cable (F/UTP) (PVC, Orange) Spec Sheet
    Specification Sheet for the EVNSL0610A-1000
 
  • Specification Sheet... 
  • CAT5e Shielded 350-MHz Solid Bulk Cable (STP) (24 AWG, 4-Pair, PVC, Red) Spec Sheet
    Specification Sheet for the EVNSL0506A-1000
 
  • Specification Sheet... 
  • GigaTrue 550 CAT6, 550-MHz Stranded Bulk Cable, 4-Pair, PVC, 24 AWG, Pink, 1000-ft. (304.8-m)
 

Black Box Explains… Category 7/Class F.


Category 7/Class F (ISO/IEC 11801:2002) specifies a frequency range of 1–600 MHz over 100 meters of fully shielded twisted-pair cabling. It encompasses four individually shielded pairs inside an overall shield,... more/see it nowcalled Shielded/Foiled Twisted Pair (S/FTP) or Foiled/ Foiled Twisted Pair (F/FTP). There is a pending class Fa, based on the use of S/FTP cable to 1000 MHz. It can support 10GBASE-T transmissions.

With both types of cable, each twisted pair is enclosed in foil. In S/FTP cable, all four pairs are encased in an overall metal braid. In F/FTP, the four pairs are encased in foil.

Category 7/Class F cable can be terminated with two interface designs as specified in IEC 6063-7-7 and IEC 61076-3-104. One is an RJ-45 compatible GG-45 connector. The other is the more common TERA connector, which was launched in 1999.

Category 7/Class F is backwards compatible with traditional CAT6 and CAT5 cable, but it has far more stringent specifications for crosstalk and system noise. The fully shielded cable virtually eliminates crosstalk between the pairs. In addition, the cable is noise resistant, which makes the Category 7/Class F systems ideal for high EMI areas, such as industrial and medical imaging facilities.
Category 7/Class F cable can also increase security by preventing the emission of data signals from the cable to nearby areas. collapse

Results 81-90 of 138 << < 6 7 8 9 10 > >> 
Close

Support

Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.



 
Print
Black Box 1-877-877-2269 Black Box Network Services