Black Box products can be conveniently purchased
through a broad range of qualified distributors
and resellers located around the globe.
Black Box delivers solutions from our manufacturing
Click here for our solution partner directory.
Get fast answers from one of our Experts.
Helping you is our priority at Black Box.
You can contact us by phone, fax, email, or chat with one of our Experts for immediate assistance.
Helping you is our priority at Black Box.You can contact us by phone, fax, or email with one of our Experts for immediate assistance.
A technical expert will call you within 30 seconds.
It's live and it's free.
Get fast answers
from one of our
Helping you is our priority at Black
Box. You can contact us by phone,
fax, or email with one of our Experts for immediate assistance.
We're available from 9:00 am - 5:30 pm
We're available from 9:00 am - 6:30 pm
We’ll respond in 60 seconds or less!
We'll answer in 60 minutes!
(8 AM-5 PM Eastern)
(24x7, 365 days a year)
Straight-pinned cable has the most common type of pinning. The send and receive pairs are wired straight-through on either end of the cable.
Crossover cable is generally used for peer-to-peer connections.... more/see it nowThe send and receive pairs are crossed between Connector A to Connector B on either end of the cable. collapse
Carefully remove the jacketing from the cable and expose one inch of the insulated wire conductors. Do not remove any insulation from the conductors. When the RJ-45 connector is... more/see it nowcrimped, the contacts inside will pierce the conductor insulation.
Untwist the wires to within 1/8" of the jacket. Arrange the wires according to the cable spec (568B in this case). Flatten and align the wires. Make one straight cut across all the conductors, removing approximately 1/2" to ensure the ends are of equal length.
Slide the wires into a connector. The cable jacket should extend into the connector about 1/4" for strain relief. Orient the wires so connector Pin 1 aligns with cable Pin 1, etc. Hold the connector in front of you. With the locking tab down, Pin 1 is on the far left.
Insert the connector into a crimp tool. Make sure you’re using the proper die. Firmly squeeze the handles. They’ll lock in a ratcheting action. A final click indicates the connector is firmly latched.
Check your work using a continuity tester or cable certifier rated for the cable standard you’re installing. Your tester should be able to check for shorts, opens, or miswires.
Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.
You have added this item to your cart.
Important message about your cart:
You requested more of "" than the currently available. The quantity has
been changed to them maximum quantity available. View your cart.