Loading


Categories (x) > Cabinets & Racks > Cabinet Accessories > Hardware (x)

Results 21-27 of 27 < 1 2 3 

Black Box Explains...10-32, 12-24, and M6 rails.

The rails on cabinets and racks typically come with one of three mounting options: 10-32, 12-24, or M6.

The 10-32 and 12-24 options are round holes found on drilled and tapped... more/see it nowrails. You’ll find 10-32 openings on cabinets, while 12-24 holes are more commonly found on relay racks and frames. However, exceptions do exist. It’s very important to find out which type of mounting option your equipment requires before you order a cabinet or rack.

M6 holes are square, rather than round. M6 rails were developed to hold rackmount equipment, and you will find them on most server cabinets.

What makes M6 rails so popular on server cabinets? They’re adaptable. With just one cage nut, you can change a square hole into a round one. That gives you much more versatility in your equipment and mounting choices.

If you have a wide array of equipment, such as rackmount servers, hubs, routers, and patch panels, your best bet is a cabinet with M6 rails. It will accommodate the rackmount servers, and the other equipment can be mounted on those same rails using cage nuts.

If you’re unsure what type of cabinet, rack, or frame is best for your application, contact the experts at Black Box Tech Support. They’ll be glad to help you find the right enclosure for your equipment. collapse


Product Data Sheets (pdf)...23"-to-19" Rackmount Adapters

  • Manual... 
  • Elite Cabinet Grounding Kit, What's Included
    What's Included in the ECGK Package (Version 1)
 

Screw Dimensions

Find the right screw length for your cabinet or rack.

Types of Screws

Screw Dimensions

There are two basic kinds of screws used for cabinets and racks—panhead screws and countersunk screws—and... more/see it nowthey’re measured in two different ways. Because the standard way to measure is from the tip of the business end of the screw to where the screw rests on the material it’s fastened to, a panhead screw is measured to the bottom of its head, whereas a countersunk screw is measured to the top of its head.
collapse

  • Manual... 
  • Elite Cabinet Anti-Tip Legs Manual
    Manual for the ECAT1.
 

Product Data Sheets (pdf)...Patch Panel Hinge Kits


Product Data Sheets (pdf)...Performance Plus Cabinets

Results 21-27 of 27 < 1 2 3 
Close

Support

Delivering superior technical support is our highest priority. Depending on the products or services we provide for you, please visit your appropriate support area.



 
Print
Black Box 1-877-877-2269 Black Box Network Services